Need Spirolox retaining rings
Thread Starter
Teching In
Joined: Nov 2015
Posts: 19
Likes: 0
Need Spirolox retaining rings I have new 6.0 flat tops and H rods and need the correct Spirolox retaining rings for my LQ9 sealed power replacement Pistons. Anyone know what size or part number for these rings I need.
Before you buy the GM, you may want to check with Speed Pro and see what they recommend since it is their pistons. If anything, they probably have something cheaper than GM. I'm pretty sure you're looking for c-clips instead of spirolox though.
Thread Starter
Teching In
Joined: Nov 2015
Posts: 19
Likes: 0
Okay, it looks like I have some problems here. My speed pro h1129 pistons are pressed pin type according to their specs? But the Pistons have the groove for the retainers. I need retainers as my rods are for floating pins. The pin bore is 0.945" on the rods
If it has the grooves, then it should be ok to use with the floating pins. If they didn't come with the c-clips, then you may just need to call and see what they have. If the c-clips are wrong for the groove, then they can come out and cause some bad juju.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
