When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was suggesting a full pan of atf, as I have run many times before, because it works.
Well I've got a gunked up 4.8 I picked up for $200 and I'm about to put together a half-*** engine run stand. Maybe I'll try it. Sounds scary but hey if it comes out squeaky clean and I'm about to change bearings, rings, pump anyway..
How long did you run it for? Driving or just idling? Did you change the oil several times after?
100 miles of driving, or you can idle it out of gas, either way. Cut open the filter afterwards, you will be blown away by the amount of stuff it will get out.
I was suggesting a full pan of atf, as I have run many times before, because it works.
Do you fire it up? I can see ATF providing some sort of lubrication but not nearly as much as motor oil, not to mention its viscosity is equivalent to water.
Do you fire it up? I can see ATF providing some sort of lubrication but not nearly as much as motor oil, not to mention its viscosity is equivalent to water.