N/A 346 Build
The clutch and the whole assembly is new right?
Is it the transmission? Maybe it was going and with the new hp it finished it off??? Better now than on the dyno though. Can you tell where the sound is coming from?
Is it the transmission? Maybe it was going and with the new hp it finished it off??? Better now than on the dyno though. Can you tell where the sound is coming from?
Thread Starter
Teching In
Joined: Apr 2016
Posts: 25
Likes: 0
From: Chicago
New RPS clutch and it feels and sound like it coming from the area at my feet. Its back in the shop and the guy is finding out what went wrong. Should have answer by Monday. Trans? No way because I'm still driving like a grandma lol. Breaking in the clutch.
Thread Starter
Teching In
Joined: Apr 2016
Posts: 25
Likes: 0
From: Chicago
Ok good news!! Problem was the torque tube bearing failed. Not sure how that happened but keep fingers crossed that the repair fixes it permanently. The car is being put back together and will be finished by today or tomorrow. Now finally I can look forward to the dyno tune.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Teching In
Joined: Apr 2016
Posts: 25
Likes: 0
From: Chicago
Ok finally my car is being tuned tomorrow and we shall see what this package will make on a mustang dyno and how good she runs with all the bugs fixed. Keep fingers crossed everything goes well and the car doesn't breakdown.
Thread Starter
Teching In
Joined: Apr 2016
Posts: 25
Likes: 0
From: Chicago
RESULTS ARE IN!!!!!!!!! Yes they are just dyno numbers but holy s... its fun to drive. I did do a 6 grand pull not quite full throttle.....still scares me a little and it put a huge smile on my face. When I replace my stupid CAI for a better one it will drive better and give me a little more power. I am totally happy with Tony's package and the good news is that everything I bought can be used on a bigger cube short block in the future IF I want more power. Here is the dyno graph
451 HP
401 Torque
451 HP
401 Torque