Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Effects of valve lift on part throttle.

Thread Tools
 
Search this Thread
 
Old 05-04-2021, 06:56 PM
  #21  
ModSquad
iTrader: (6)
 
Che70velle's Avatar
 
Join Date: Jan 2012
Location: Dawsonville Ga.
Posts: 6,607
Received 3,691 Likes on 2,246 Posts
LS1Tech 10 Year
Default

Originally Posted by wannafbody
Doesn't overlap determine drivability to a certain degree? Lower overlap is easier to drive on the street, or so I've heard.
Below say...2500 rpm...yes.
The following users liked this post:
00pooterSS (05-06-2021)
Old 05-05-2021, 02:17 PM
  #22  
12 Second Club
iTrader: (16)
 
Z28SteveA4's Avatar
 
Join Date: Apr 2008
Location: New jersey
Posts: 1,249
Received 183 Likes on 141 Posts
LS1Tech 10 Year
Default

Originally Posted by wannafbody
Doesn't overlap determine drivability to a certain degree? Lower overlap is easier to drive on the street, or so I've heard.
Overlap can make or break a cam depending on the use of the cam. If you want a very drivable car overlap is going to make that very difficult. Like mentioned above cubic inch, head efficiency, compression and a very good tune help with overlap and drivability but there is still a limit if you want a “streetable” cam.
The following users liked this post:
00pooterSS (05-06-2021)



Quick Reply: Effects of valve lift on part throttle.



All times are GMT -5. The time now is 04:50 PM.