ARP head bolts...How far have you gone wit them?
#63
10 Second Club
iTrader: (26)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thats the ones I use.....
The only problem is finding a way to mount it. I had to made a sleeve and thread it on both end and put a 90 elbow on the opposite side....you could buy a brass female to female tho. Then i put a washer under the nozzle head and on the outside of the silicone boot its in so the fittings wouldnt pull through the boot.
The only problem is finding a way to mount it. I had to made a sleeve and thread it on both end and put a 90 elbow on the opposite side....you could buy a brass female to female tho. Then i put a washer under the nozzle head and on the outside of the silicone boot its in so the fittings wouldnt pull through the boot.
Edit ...I found some 1/8 not female to 1/4 OD quick connect. Hopefully that works but open to other suggestions.
Last edited by ddnspider; 02-19-2022 at 03:51 PM.