what rods to get
what rods to get im looking to 6.125 rods i see some on ebay for like 395 the are by ams racing . anyone heard of those rods or better yet used them? Im looking at 700-800 hp so can they hold that if not what rods and how much do they run thanks
answer me this. if your going to spend the money to make 800hp why are you wanting to go cheap on a rod which is an intergral part of your motor 
. for your power mark i'd look at lunati, crower, or manley rods.
FWIW im using the same rods Lswonder is. my application is n/a and looking at 450rwhp.
. for your power mark i'd look at lunati, crower, or manley rods.FWIW im using the same rods Lswonder is. my application is n/a and looking at 450rwhp.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I have Eagle H-Beams and don't have a problem going to about 750HP (on spray) with them but doing it again, I would have just baught Lunati Pro-Billets.......
when I add up the cost for the rods ($550) and then add in the $200 for L-19 rod bolts and $50 to resize them, I could have paid the extra $200 and had a rod that is RATED (not "know to work at") at 1100HP.......
live and lean.........then by the right ****
when I add up the cost for the rods ($550) and then add in the $200 for L-19 rod bolts and $50 to resize them, I could have paid the extra $200 and had a rod that is RATED (not "know to work at") at 1100HP.......
live and lean.........then by the right ****
We offer Crower LS1 specific rods. That's what I would run, either that or a Lunati Pro Mod 
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
12 Second Truck Club
iTrader: (1)
Joined: Jun 2004
Posts: 1,395
Likes: 0
From: The Chicken Ranch, California
I know you guys have good intentions, but you're getting crazy. He's not looking for $2000 set of rods (at least that's what I gathered). Eagle, Crower, Lunati will all work just fine for his application.
