best heads?
#21
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
LS6 give you a near-stock CR with no cutting on an
LS1 F-body. 6.0 heads will drop you, 5.3s will raise
you. Dunno about your neck of the woods, but in
Florida I would have a hell of a time trying to run
11+:1 CR on pump gas in the summer.
My present plan involves home-porting truck heads
and shaving maybe 0.050 off them. So far I'm only
in the "slice one thin and see what's inside" stage
(3 cuts done, 2 to go to complete one cylinder's
"CAT scan"; takes half an hour per cut with the
abrasive blade chop saw).
Yes, I will be posting scans. No, I don't need anyone
to ask me if I'm done yet. ;P
LS1 F-body. 6.0 heads will drop you, 5.3s will raise
you. Dunno about your neck of the woods, but in
Florida I would have a hell of a time trying to run
11+:1 CR on pump gas in the summer.
My present plan involves home-porting truck heads
and shaving maybe 0.050 off them. So far I'm only
in the "slice one thin and see what's inside" stage
(3 cuts done, 2 to go to complete one cylinder's
"CAT scan"; takes half an hour per cut with the
abrasive blade chop saw).
Yes, I will be posting scans. No, I don't need anyone
to ask me if I'm done yet. ;P
#23
*We begin with a new GM raw 035 casting where all dimensions are +.050".
*Precision welded combustion chambers.
*Heat treated to T6 specs.
*Milled to OEM height
*5 axis CNC machined.
*Hand detailed and assembled.
*23-8N Patriot Stainless Valves
*Bronze Guides
*Patriot Gold .650" Dual Springs (Why buy imatations when you can have the orginal?)
*Titanium Retainers
*5 Angle Valve Job
*No core required
*Free MLS 6.0 Head Gaskets
*Free OE Head Bolts
*Flow Sheet Included
*100% Pre-Installation Money Back Guarantee
*Things have changed...There is no need to pay more.
*Precision welded combustion chambers.
*Heat treated to T6 specs.
*Milled to OEM height
*5 axis CNC machined.
*Hand detailed and assembled.
*23-8N Patriot Stainless Valves
*Bronze Guides
*Patriot Gold .650" Dual Springs (Why buy imatations when you can have the orginal?)
*Titanium Retainers
*5 Angle Valve Job
*No core required
*Free MLS 6.0 Head Gaskets
*Free OE Head Bolts
*Flow Sheet Included
*100% Pre-Installation Money Back Guarantee
*Things have changed...There is no need to pay more.
#25
TECH Fanatic
PRC heads
Originally Posted by P Mack
PRC heads should be coming out soon. They're priced about the same as patriots and had some good results.
#27
FormerVendor
iTrader: (8)
Join Date: Dec 2001
Location: Melbourne, FL
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6FirebirdTA00
ok i suck at finding these places, whats the site for PRC
What are you looking to get out of your car...That might help your decision.
Last edited by VSGLS1; 11-01-2004 at 02:35 PM.
#31
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
I see a lot of post that say witch heads are the best or witch heads should i get.
One that is never mentions and is one of the best sets out is SDPC. You can get a set of LS6 heads for $1900 that have been ported. They are flowing just as much or even more than most of the heads out there and they are using stock vavles.
One that is never mentions and is one of the best sets out is SDPC. You can get a set of LS6 heads for $1900 that have been ported. They are flowing just as much or even more than most of the heads out there and they are using stock vavles.
#35
TECH Fanatic
Originally Posted by GUNNAR@PATRIOT
Patriot Heads
WINNER-THUNDER SHOOTOUT 2003
QUICK STOCK DIVISION
WINNER-THUNDER SHOOTOUT 2003
QUICK STOCK DIVISION
TSP won the race @ thunder last year.The heads used was not your everyday set of heads.They started life as patriot castings,the rest is not patriot.The heads was completely hand detailed.I performed all of this work at my shop.The motor was shifted at 7400 rpm all day long due to a tranny problem.
#36
TECH Resident
Join Date: Nov 2001
Location: Chattanooga,Tn
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Terry@RacetechSpeed
TSP won the race @ thunder last year.The heads used was not your everyday set of heads.They started life as patriot castings,the rest is not patriot.The heads was completely hand detailed.I performed all of this work at my shop.The motor was shifted at 7400 rpm all day long due to a tranny problem.
Originally Posted by Terry@RacetechSpeed
I will continue to offer the best priced,highest quality head that I can produce.I have said it many times,that my goal is to offer the best set of heads,REGARDLESS OF PRICE.Yes, our prices are ceaper than most,but on my flow bench I have yet to see a head outflow what I offer.This includes the 5.3 and the LS6 style.
I did not come on here and bash back and forth about flow numbers vs another company or Dyno's vs Dyno's.It does not matter unless they are all tested on the same bench at the same time with the same bore size ect...I want my product to speak for itself, on the track.
With that being said,look at the results from the Quick Stock class from the Thunder Shootout.
I did not come on here and bash back and forth about flow numbers vs another company or Dyno's vs Dyno's.It does not matter unless they are all tested on the same bench at the same time with the same bore size ect...I want my product to speak for itself, on the track.
With that being said,look at the results from the Quick Stock class from the Thunder Shootout.
https://ls1tech.com/forums/showthrea...ootout+results
#39
TECH Fanatic
Originally Posted by H82BBad
um you claimed they were patriot heads back then Terry.
https://ls1tech.com/forums/showthrea...ootout+results
https://ls1tech.com/forums/showthrea...ootout+results
#40
TECH Fanatic
Originally Posted by matts22
Terry, can you please check your pm/email from me and send me a reply?