Z-286speed

I also go to tech, so its right down the road.

BADSZ28

iTrader: (39)

If this cam were on a 110LSA would that bring up the torque curve and how would this affect the HP? PTV? Idle? Drivability?

TIA

PREDATOR-Z

With speed density tuning (MAFLESS), it wouldn't be a problem.

turbo'd stang

Anyone know if this cam will clear a stock valved head that has been milled .030?

Thanks

Nate_Taufer

iTrader: (1)

.030? i'd say no way jose

turbo'd stang

I thought not, just wanted to be certain.

PREDATOR-Z

No way.

JOE02SS

iTrader: (1)

that sounds awesome, i ordered mine today. can't wait!

Z-286speed

Ok, i have a 99 camaro, will i need(really need) a new oil pump with this cam, and also the chain. It has 72k on the clock.

pdd

iTrader: (3)

while your in there i'd definatly do it, especially with 72k miles on it. the stock chain is probably getting stretched and the older ls1 oil pumps are **** to failure

Jason 98 TA

iTrader: (4)

The camshaft has right under .100 clearance on each side! That being said .030 would make it tight, but it probably would work. Joseph is going to install it on heads cut 30 & 918s & test it next week

LS1SS4ever

Waiting for the results

Jason 98 TA

iTrader: (4)

Here's the graph of another 233/239 install!! This is on a cam only car that just got fresh bearings, rings, x pipe & 233/239 cam

black_z

iTrader: (4)

Nice torque

69_YENKO

iTrader: (16)

I met Master Cheif last night as he came in to town. That cam ownes hes making all that power with stock '98 heads, stock ls1 manifold. plus he got around 26mpg on the highway with it . My mind has been made up, its gunna be the 233/239.

PREDATOR-Z

What street stall is recomended (minimum) on A4's?? with 3.73:1 gears.

PHANTA-Z

Seems this cam gives up ~10 peak hp to the MS3 (my current "cam that i am getting after X-mas") but picks up at least that much tq, and lower in the range. Is this about right? Decisions decisions decisions.

FRCBobby

iTrader: (27)

This cam sounds interesting. Since this cam is so new I am guessing that no one has any 1/4 mile times yet?

reocamaro

iTrader: (5)

Hey. this is my very first post, and I don't want to make a habit of being a pain. I just visited TSP's website to try and track down this cam because a cam that produces that much power is a steal for 310$. Right now I'm stationed over in Iraq, and can't get to the phone so the internet is my only way out. Can anyone show me the way?If you'd like to just email me here

SupahRich

iTrader: (14)

You should be able to e-mail one of the guys here on the board that's with TSP(Like Jason, the guy that started this thread). Let them know that it isn't possible for you to call and place the order. I'm guessing that due to the cam being so new... they haven't updated it on their site yet? I noticed that it wasn't listed the other day as well.