My new custom Ed Curtis Cam Specs...they're not small!
#1
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
My new custom Ed Curtis Cam Specs...they're not small!
236/244 .631/.631 113 LSA 111 ICL
Powerband from 3500-7000rpms There's a lot more going on with this cam than just the cam specs you see. Shift point is 7400rpms
Supposed to make a lot more power than the coveted G5X3. We'll see.
The cam is setup for maximum power on pump gas both on and off the bottle, i.e. no more than a 150-175 shot.
Will keep everyone updated. With the addition of this cam and my new additions including a LSX 90/90 setup, EWP, and better headers, I'd love to be at 480+rwhp N/A through a 12 bolt and 60lb 18x10.5 wheels/tires, NO dyno tricks, full exhaust, 28 degrees of timing, and 10.9:1 compression.......and of course some very low 10 second track times on bottle
#4
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Viper
Nice! Changing springs or rockers and lifters?
#5
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by verbs
236/244 .631/.631 113 LSA 111 ICL
Powerband from 3500-7000rpms There's a lot more going on with this cam than just the cam specs you see. Shift point is 7400rpms
#6
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 66deuce
care to share any more specs,if you have them?(i know what your going to say,but i had to ask,lol.)i was going to have Ed grind me one but i ran out of money when my DD broke down and had to fix it.
Trending Topics
#8
That sound like one bad *** cam Ed had ground for you.You should put down some good #s.****,my tiny 220/224 EDC cam put down the #s in my sig before my CF DS,Exedy twin disc,EWP and ORPs.Ed is the MAN.
Anthony
Anthony
#11
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MUSTANGEATER
Sounds like a great combo. Is it a straight 1.7 rocker arm ratio? Good luck getting it all together.
Floyd.
Floyd.
#13
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Louis
Its bigger than the X3, so It better make more power
#14
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPANKY LS1
Are you gonna dyno with the cam being the only change, or are you changing the intake, TB, cam, and headers all at once? I'd like to see how much the cam actually helps.
Shawn
Shawn
So yes, there will be a direct cam comparo.
#16
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
I really don't think it's fair to expect an off the shelf cam designed with stock heads in mind to make the same #s as a cam designed specifically for a set of heads.
#17
TECH Junkie
iTrader: (24)
Originally Posted by verbs
I will be doing a dyno with the headers, EWP, and LSX 90/90 combo with the G5X3 for a baseline, and will swap to Ed's cam and redyno.
So yes, there will be a direct cam comparo.
So yes, there will be a direct cam comparo.
Originally Posted by verbs
I really don't think it's fair to expect an off the shelf cam designed with stock heads in mind to make the same #s as a cam designed specifically for a set of heads.
Shawn