***Introducing our Vacuum Pump ***
#21
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Earth
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cody Brooks
14-15 lbs will give you all the ring seal you need. for that much money it should be electric so that you can hide it say where the a.i.r. pump used to be and not have to mess with your accessory belt.
#24
TECH Resident
iTrader: (2)
Originally Posted by Tuner@AandACorvette
14"-15" of vacuum, at sufficient CFM, would need 1.0 HP- 1.5 HP DC motor and that would require well over 60 amps, not to mention the weight. Not practical.
#25
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Earth
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TAQuickness
How hard would it be to fit this unit into the F-Bod AC location?
Thanks,
Charlie
#26
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Earth
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cody Brooks
didn't figure It'd take that much electric motor well anyways. I think I'd wait for a cheaper option and a better mounting location. near the ac would be a great spot. I think I'd also want a small serpentine like that on the ac for the sake of a serpentine being a better design and not having to re-tension the belt every time I tear down the front of the motor for something.
Also, in this application, a cog belt design is superior to that of the serpentine belt because vacuum pumps can not take side loads. Besides, I don't think a serp is made that short.
Thanks,
Charlie
#28
6600 rpm clutch dump of death Administrator
JMX did some testing of an electric vaccum pump. At low speed it was able to pull vaccum. Under load it was unable to pull vaccum on the engine and saw no net benefit. This is a great idea, and a great addition to the LS1.
#31
8 Second Club
iTrader: (3)
13"-15" is the max. recommended vacuum for any wet sump oiling system due to issues such as what GrannySShifting just mentioned. 30" shouldn't be a problem with a dry sump system such as on the new C6.
I for one don't think the price is out of line at all. If you've ever shopped for a vacuum pump you'll find you can't touch just the pump for less than $350. After you piece together all the fittings, pulley's, belt, etc. your up to $800 EASY. I know...I just installed one on my race car.
I for one don't think the price is out of line at all. If you've ever shopped for a vacuum pump you'll find you can't touch just the pump for less than $350. After you piece together all the fittings, pulley's, belt, etc. your up to $800 EASY. I know...I just installed one on my race car.
#32
LS1Tech Co-Founder
iTrader: (34)
Originally Posted by shouldaboughttheZ
Really nice piece. But $800 for 12rwhp?
shouldaboughttheZ, go ahead and make say 750rwhp, and now try to make 800rwhp. Not that easy.
#33
TECH Fanatic
iTrader: (4)
Join Date: May 2003
Location: Commerce, MI
Posts: 1,563
Likes: 0
Received 0 Likes
on
0 Posts
The price is kinda steep, I know if it were around 500-600 I'd be in for sure. What really bugs me is the kit doesn't include everything you need, you still need a catch-can :lame:
-Steve
-Steve
#35
8 Second Club
iTrader: (3)
Originally Posted by Pro Stock John
shouldaboughttheZ, go ahead and make say 750rwhp, and now try to make 800rwhp. Not that easy.
#36
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Earth
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1fastWS6
Exactly....everything is exponentially more expensive the faster you go. If you can't afford $800 on a vacuum pump, chances are you don't need one either. I don't know about the pump advertised here, but most pumps are not meant for street/daily driving anyway because they need to be rebuilt often.
This can be used as a daily driver. I logged over 10k miles with the prototype and the pump remained as effective after 10k as the day it was installed.
That being said, my bet is that most people who buy a vacuum pump are high horsepower, limited annual mileage motors and of those, most will be large inch or ultra high revving stock stokes.
Charlie
#37
While I am ? on the price I am a firm believer in the vaccum pump...
I will probably have a moroso on it..
Esp when you build an engine with having one in mind.. LOW TENSION ring pack saves friction and seals better with a vaccum pump..
The combination of the low tension rings and 15" can be good for over 50hp in some cases.. Most of the time with regular rings 20hp... On forced induction engines more so towards 50hp...
I will probably have a moroso on it..
Esp when you build an engine with having one in mind.. LOW TENSION ring pack saves friction and seals better with a vaccum pump..
The combination of the low tension rings and 15" can be good for over 50hp in some cases.. Most of the time with regular rings 20hp... On forced induction engines more so towards 50hp...
#38
TECH Apprentice
Thread Starter
Join Date: Jun 2002
Location: Earth
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Our pumps are competitively priced. We include all the mounting plates, bolts and hardware required to make this a 1 hour bolt-on.
Last, our pumps are the most compact and lightest vacuum pumps on the market.
Charlie
Last, our pumps are the most compact and lightest vacuum pumps on the market.
Charlie
#40
6600 rpm clutch dump of death Administrator
I look forward to testing one of these out in the not so distant future to see where it can take us... This is a fantastic idea, and implementation. We've been looking at how to do apump, and up till now it was goingt o cost us an accessory which wasn't an option. This idea is simple, elegant, and functional.
Props to you guys for coming up with this...
Props to you guys for coming up with this...