Need help! H/C install
01-06-2006, 09:15 PM
#122
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Pump seems dry to me as well. There is no oil dripping out. Felt around inside the pump with my finger and didnt feel any as well.
The spacer fell off the pump before I could see how it was on there. So I cant tell for sure if thats the problem or not.
Everything else seems fine to me. Should I chance it and install it with the spacer in the right spot? and hope that was my problem?
I mean ****...thats has to be it cause of the lack of oil in the pump. I could see how I put the spacer on wrong as well; its definitely possible thats the problem.
The spacer fell off the pump before I could see how it was on there. So I cant tell for sure if thats the problem or not.
Everything else seems fine to me. Should I chance it and install it with the spacer in the right spot? and hope that was my problem?
I mean ****...thats has to be it cause of the lack of oil in the pump. I could see how I put the spacer on wrong as well; its definitely possible thats the problem.
Last edited by Lithium; 01-06-2006 at 09:30 PM.
01-07-2006, 10:14 AM
#123
On The Tree
iTrader: (4)
Join Date: Feb 2003
Location: CT
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately, knowing how that spacer was on was a critical piece of information in determining the cause of the problem. All I can say at this point is take your time, double check everything, and hope for the best.
01-07-2006, 02:39 PM
#124
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Greg_E
There is a pressure relief valve in the pump. The spring puts pressure on that relief valve. If you look on the right side bottom of the pump, you will see a large Allen head screw. The spring is behind that. If the pump was working when you removed it, and you didn't mess around with it when you had the pump out, I doubt it's the problem. Some people put a shim between the screw and the spring to increase oil pressure. I left my Katech ported LS6 oil pump alone. I figure they know what they're doing, so why mess with it. If you remove the two right side bolts you might be able to slide the spacer out without disassembling everything. While your in there, you might want to remove the pump cover and check to make sure the pump is centered on the crank sprocket/oil pump drive. You can read my thread on that. People have offered a few different ways to accomplish that. When you have the pump cover off, you can squirt some heavy weight oil in there to help prime the pump.
Take your time and check everything twice.
Take your time and check everything twice.
Thats just it. This is the first time I have put it on, so I cant say that it was working before or not.
I bought it off a member on here that ported the LS6 pump himself...
01-07-2006, 11:32 PM
#125
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Alright the spacer in on correct. The O ring is perfect. Got everything back on. Will fire it up tommarow. I will pray tonight for it to flow oil 
If its still not flowing...anyone want a free car? lol.
If its still not flowing...anyone want a free car? lol.
01-08-2006, 07:39 AM
#127
Hey, sorry that I never posted that pic. First, I couldn't figure out how to post a pic quickly and then things got real crazy for me. Did you remove the pump and take it apart while you had it all apart?
Is there a way test the pump w/o actually running the engine?
Is there a way test the pump w/o actually running the engine?
01-08-2006, 12:34 PM
#129
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CBX
Good luck. If it doesn't work, just buy another pump to be sure.
01-08-2006, 03:27 PM
#135
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
yeah...but when I drained all the coolant a bunch of **** got in it. So I am going to run down to autozone real quick and get some more. But otherwise yeah its back together; just got to start the ******.
01-08-2006, 03:28 PM
#136
TECH Apprentice
Join Date: Oct 2005
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lithium
yeah...but when I drained all the coolant a bunch of **** got in it. So I am going to run down to autozone real quick and get some more. But otherwise yeah its back together; just got to start the ******.
01-08-2006, 05:10 PM
#140
SSU's Drunk Typing Whore
Thread Starter
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Nothing at all.
Let it run for 5 seconds and nothing came up.
So I am going to have to swap it with the stocker then huh?
I know the spacer is on correct now atleast and still no pressure.
Let it run for 5 seconds and nothing came up.
So I am going to have to swap it with the stocker then huh?
I know the spacer is on correct now atleast and still no pressure.
Last edited by Lithium; 01-08-2006 at 05:18 PM.