Who makes thicker walled pushrods?
07-06-2006, 12:32 PM
#23
10 Second Club
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
ok, got a little more info I'll share
talked to FTI, they can get me a 5/16th OD pushrod with walls up to ~.113 thick. above that you have to go to a 7/16th and that may not work with the stock pushrod holes in the head.
talked to FTI, they can get me a 5/16th OD pushrod with walls up to ~.113 thick. above that you have to go to a 7/16th and that may not work with the stock pushrod holes in the head.
07-06-2006, 12:48 PM
#24
Banned
Join Date: Aug 2005
Location: ohio
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
The 5/16" .080"wall should be more than enough for most any hydraulic roller application. We sell the Trick Flows for 84.50 set and they have them in every .050" increment's.
07-06-2006, 12:48 PM
#25
Originally Posted by 383ss
ok, got a little more info I'll share
talked to FTI, they can get me a 5/16th OD pushrod with walls up to ~.113 thick.
talked to FTI, they can get me a 5/16th OD pushrod with walls up to ~.113 thick.
07-06-2006, 12:55 PM
#26
TECH Fanatic
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 383ss
3/8 OD require boring the pushrod holes don't they?
But I believe you'll have to play close attention with a ls1/ls6 head in regards to increased o.d. diameter pushrods.
07-06-2006, 02:10 PM
#27
10 Second Club
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mike@TEA
The 5/16" .080"wall should be more than enough for most any hydraulic roller application. We sell the Trick Flows for 84.50 set and they have them in every .050" increment's.
I actually need 7.225" so I'm limited there too.
yes, it will make the oil passage smaller.
