5 springs broken....good thing they were double springs
#1
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
5 springs broken....good thing they were double springs..(pics are in)
PICS are now posted here.
Good thing the inner springs held up. Also, all of the valve seals were history, thats where all my oil was going. The pistons were caked up like crazy with burnt oil too. The pics are nuts. But I cleaned one and it looks like new. Have to spend a few more hours cleaning the rest. The heads came off perfectly in about 2 hours with the engine still in the car, and I have ARP head studs
Cylinder walls are perfect and the sleeves haven't moved. Also, the gaskets were not blown, they were perfect.
The pics are too big to host, pretty crazy looking though. If someone wants to host them I can e-mail them to you.
Just to show it was done with the engine still in the car, with ARP head studs. There was some na'sayers
drivers side:
passengers side, you can see between the sides that all my valve seals were totally gone.
They look brand new after they're cleaned.
Good thing the inner springs held up. Also, all of the valve seals were history, thats where all my oil was going. The pistons were caked up like crazy with burnt oil too. The pics are nuts. But I cleaned one and it looks like new. Have to spend a few more hours cleaning the rest. The heads came off perfectly in about 2 hours with the engine still in the car, and I have ARP head studs
Cylinder walls are perfect and the sleeves haven't moved. Also, the gaskets were not blown, they were perfect.
The pics are too big to host, pretty crazy looking though. If someone wants to host them I can e-mail them to you.
Just to show it was done with the engine still in the car, with ARP head studs. There was some na'sayers
drivers side:
passengers side, you can see between the sides that all my valve seals were totally gone.
They look brand new after they're cleaned.
Last edited by Quickin; 03-19-2006 at 11:20 PM.
#4
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ArcticZ28
How the hell did you break 5 springs? Were these all at once?
He's a badass and he's rebuilding them.
#7
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orangeapeel
Rebuilding the springs? haha that would take a baaaad ***!
Trending Topics
#12
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orangeapeel
So basically you are essentially being upgraded as well. Is this gong on that beast in your sig? 436CID?
Pics are coming in a few minutes.
#15
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orangeapeel
again! What are the eyelash cc's?
They're only LS1 heads, not even LS6. The flow sheet I have from Agostino, from 4 years ago says 304cfm @.600 and 231cfm exhasut. Plus a stock TB still So yes, I'm chokin the bajeezus out of 436ci. It'll make about 500/503. 242/242 .610/.610 114 lsa. I want the ETP 265's and the Harrop intake and a bigger cam, all in time
#17
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ferocity02
They look like Patriot Golds... Maybe you got too throttle happy on a cold motor?
What happened, accodring to the guy at the head shop was: The spring dampers on each of the 5 springs that broke, scored the main springs which caused them to let go. Only the springs with broken spring dampers had broken springs. Coincidence, I think not
Are Patriot Golds any good? These were supposed to be ARE heads all the way.
.
#18
TECH Senior Member
iTrader: (60)
Originally Posted by Quickin
I have never once put my car in reverse or drive before letting it warm up for 2 full minutes, minimum. Than I drive it like a granny until I see the temp needle start moving. Just a rule of mine.
What happened, accodring to the guy at the head shop was: The spring dampers on each of the 5 springs that broke, scored the main springs which caused them to let go. Only the springs with broken spring dampers had broken springs. Coincidence, I think not
Are Patriot Golds any good? These were supposed to be ARE heads all the way.
.
What happened, accodring to the guy at the head shop was: The spring dampers on each of the 5 springs that broke, scored the main springs which caused them to let go. Only the springs with broken spring dampers had broken springs. Coincidence, I think not
Are Patriot Golds any good? These were supposed to be ARE heads all the way.
.
#19
TECH Veteran
Thread Starter
Join Date: Dec 2001
Location: Ft. Lauderdale, FL, USA
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ferocity02
All springs look the same these days, so it was a guess. I like my Gold's. They were awfully cheap though, $260 w/ retainers, locks, seats, and seals. They have held up well though, although I am using a puni cam.
What are some good double springs? Not top of the line, but damn good ones?
#20
TECH Addict
iTrader: (1)
I had a broken 918 single spring (on the first coil at the bottom) and didn't know it because it held together. Found out when I removed the heads and took the stock valves out as the heads were being to WCRCH to be CNCed. I thought I was lucky until I read yours held together with 5 broken springs. You should play the Powerball.
Last edited by eallanboggs; 03-20-2006 at 11:43 PM.