231/237 233/239
#1
TECH Fanatic
Thread Starter
iTrader: (16)
Join Date: Nov 2004
Location: Lawton, ok
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
231/237 233/239
which cam and on what lsa 231/237 or the 233/239 or even teh torquer 2 will make the best power with 3.73 or 4.10 gears in a m6 with all bolt ons.. which will have the best et time
#6
TECH Senior Member
iTrader: (4)
Originally Posted by phoebus
I asked the guys at TSP and they said the Torquer V.2
#7
10 Second Club
iTrader: (5)
Join Date: Jun 2004
Location: Tampa, FL
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Ive got the 233/239, it runs alright. car is set up to run on nitrous, but it still went 11.9 on motor down the 1/4 this is with the 12 bolt and 373's. When ever i got my dyno tune, it had the 10 bolt in it, it made 403 rwhp sae. dont have all the bolt ons either, still have the stock ud pulley, stock TB, stock water pump, stock maf,
If i had to pick a new cam, id definitley go with teh latest rev of the Magic Stick.
If i had to pick a new cam, id definitley go with teh latest rev of the Magic Stick.
Last edited by _HAVOC_; 03-22-2006 at 08:39 AM.
Trending Topics
#8
Staging Lane
Join Date: Jul 2005
Location: Athens, Ga
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Yeah they were talking about over all they thought the Torquer was a better cam and the 233/239 is bigger that the Torquer, so if i followed the logic that you were talking about i would have gone with the 233/239 out of these cams. i guess i had my eyes open when i was looking at these cams.
Last edited by phoebus; 03-22-2006 at 09:30 AM.
#12
TECH Fanatic
iTrader: (18)
Join Date: Oct 2004
Location: Bay area, ca.
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
My buddy has a ms3 and I have the first version of the 233 / 239. My car lopes a little harder then his does after tuning, I don't know why, probably cause he's on a 113 and i'm on a 112. His car is a DD with a stock rear and he does just fine.
I love the way my car sounds. This cam with my 12 bolt and 4.11's have taken down many cars incuding cammed z06s
I love the way my car sounds. This cam with my 12 bolt and 4.11's have taken down many cars incuding cammed z06s
#14
TECH Resident
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SLP4CamaroSS
can you beat yoru friend
That is the question!
I really feel when you get to the 233/239 size anyway or even the 231/237 the driving differences there and between the MS3 are minimal at best. Might as well jump up to the MS3.
#15
On The Tree
iTrader: (1)
Join Date: Apr 2005
Location: Austin, TX
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I believe the 231/237 is on the xe lobes instead of the xer lobes of the newer 233/239. I was told by one of the guys at TSP that this is why the peak #'s will be similar but area under the curve is better on the 233/239. A good bit gets picked up in the midrange. All in the lobes I guess. I was leaning towards the 231/237 since it will be a little nicer on the springs and is still a proven performer.
-J
-J
#16
TECH Fanatic
iTrader: (30)
Join Date: Aug 2005
Location: Northern VA
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
These are both the cams Im currently looking at. I think I will go with the 233/239 for the reasons cen TX stated. With the MS3 you dont get peak power untill over 6000 and thats just not what I want when driving on the street. Either way the 112 LSA is going to be better. Id like to see some more opinions of the two though.
#17
TECH Apprentice
iTrader: (1)
Join Date: May 2005
Location: CAR LENGTHS AHEAD OF YOU
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by camarokid94
any one lookin for a 233/239 i have one brand new in the boxz one 113+1 if you wnat
#18
TECH Resident
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nokeman
These are both the cams Im currently looking at. I think I will go with the 233/239 for the reasons cen TX stated. With the MS3 you dont get peak power untill over 6000 and thats just not what I want when driving on the street. Either way the 112 LSA is going to be better. Id like to see some more opinions of the two though.
So your saying the 233/239 on 112 has MORE under the curve than a ms3 and the ms3 only makes some more power on top?
TSP what do you think? From some of the posts it seemed like the ms3 made same if not more under the curve too.
#20
TECH Enthusiast
Join Date: Jul 2005
Location: Herndon, VA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
233/239 on 112 gets my vote. It's got the perfect powerband for my set up, which is mostly on the street and at the strip on weekends. With 112+4 on X-ER lobes it should ramp up the torque pretty quick. I plan on shifting at 6300-6400, RevLimit at 6700-6800.
Anyone with 4.10's and M6 know what mph you can get to at the top of 4th, and what were you spinning at "The Top?" I'm hoping I can still be in 4th at the line and doing over 110. I don't know if it'll still do 120+ in 4th with 4.10's maybe at 6400 rpm.
Anyone with 4.10's and M6 know what mph you can get to at the top of 4th, and what were you spinning at "The Top?" I'm hoping I can still be in 4th at the line and doing over 110. I don't know if it'll still do 120+ in 4th with 4.10's maybe at 6400 rpm.