New Setup On The Way!!!!
#1
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
New Setup On The Way!!!!
Hey guys. Just ordered PRC ported LS6 heads with new double roller adj. timing set, cometics, and the new MS4 cam from TSP. Should have the car up and running in about a week to two weeks. Will get some dyno numbers and let you all know how this cam is as it is a new cam that just came out. I guess I'm going to act as a guinea pig for the MS4 in daily driver
#5
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I got the stage 1 heads w/ CNC comp. valve job & PRC double spring kit, double roller adj. timing set, MS4 cam, Cometic heads gaskets (.045 thickness), hardened pushrods, cam gasket kit, and TSP ported LS6 oil pump. Total came out to $2,362.90 shipped to Houston area. Zach and Bryan at TSP were both very helpful. Was recommended a 4400 stall but am going with a 3800 to 4000 as the motor will be juiced. I have already installed the kit on the intake p/n 20220-10 NX Nozzle direct port kit. HPE will be doing the tune once it is all back together as I only live about 8 minute from them. Will let ya'll know the outcome and will post pics and videos in the process and when finished.
#6
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Nice, i'm in the same boat, and just debating over what cam to get.. Right now i'm leaning to the 235/238 .647"/.602" 112+2, even though they thought the torquer might be better for a DD... the 235-238 seems to make more power under the curve than the torquer.. ::Shrug::
#7
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Yea I know what you are saying about the daily driver thing. This is the first fuel injected car I have went nuts with. All the others have been old style carbed motors. I have went as far as a .660" lift solid roller in a small block as a daily driver. I just depends on what the person can handle all the time non stop ( i.e. possible surging in auto car driving red-light to red-light and all of the loud thumpity-thump coming out of the pipes constantly).
Trending Topics
#8
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99T/A
Yea I know what you are saying about the daily driver thing. This is the first fuel injected car I have went nuts with. All the others have been old style carbed motors. I have went as far as a .660" lift solid roller in a small block as a daily driver. I just depends on what the person can handle all the time non stop ( i.e. possible surging in auto car driving red-light to red-light and all of the loud thumpity-thump coming out of the pipes constantly).
#9
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Zach @ TSP told me that with the .045 Cometics there won't be any PTV issues. As for the agressiveness of the lobes I guess we will find out once I get it running. I just can't wait to get it back up again. It has been down for almost 2 months now and I have been stuck driving my 96 LT1 M6 T/A. Not that it's a bad thing cuz it is a great car and the LT1's are a great motor it's just once you get into a LS1 you don't want to get out of it if ya know what I mean.
#10
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Brother....your setup is gonna rock. I cant wait to see the numbers you put down.
If you can get a sound clip of the MS4 at idle I would be forever greatfull.
Standing by to
R/
Frat
If you can get a sound clip of the MS4 at idle I would be forever greatfull.
Standing by to
R/
Frat
#11
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 99T/A
Zach @ TSP told me that with the .045 Cometics there won't be any PTV issues. As for the agressiveness of the lobes I guess we will find out once I get it running. I just can't wait to get it back up again. It has been down for almost 2 months now and I have been stuck driving my 96 LT1 M6 T/A. Not that it's a bad thing cuz it is a great car and the LT1's are a great motor it's just once you get into a LS1 you don't want to get out of it if ya know what I mean.
#12
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
No problem. I will post pics and vids as soon as possible. I will be a week or two before it is running. I will be sure to keep everybody posted as I am sure people are very curious about this cam. A big thanks again to Zach and Bryan @ TSP for all the help.
#13
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
I know what ya mean MSSING KID. Well the deal with mine is it was completely stock then I put a loudmouth cat back on it. Never dynoed and never ran at the track, just a lot of street races. My girlfriend bought me SLP LT's and ORY for my b-day then the rings went so I pulled the motor and trans. I figured if I was going to do it then go big and forget it. As soon as it gets done I am staring on a AFR 225 headed 418 ci motor. With this setup I am doing now I will be happy enough to take my time on the stroker.
#16
I ordered this same two weeks ago. I was told 14 days for the heads, but they had the cam. I called last Tuesday for an update and they said my order was done and shipped. Then I call again today and was told nothing shipped and they don't know why I was told that because the shipment for the cams were behind to the shop when I was originally told it was the heads that would take 14 days. HOPEFULLY everything got figured out during the discussion today and I can get this setup into the car soon.
#19
Originally Posted by SVT THIS
^----- Sick looking car, killer stance/front end/wheels/graphics.
Originally Posted by 99T/A
Bryan told me everything should ship by the end of the week.
I was told the same thing this time, but was also told it shipped last Tuesday when it didn't. No biggie, I just want some straight and correct answers when I call about stuff I've ordered. Still looking forward to having the setup done in a couple of weeks.
#20
On The Tree
Thread Starter
Join Date: Dec 2005
Location: Tomball, Tx
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Yea I know what you mean about wanting people to straight up with you. This is the first time I have dealt with TSP and so far everything has went great. I guess it is one of those things that when you spend the kind of money that we all spend on our cars you kinda deserve the respect. If I am told one thing and something goes wrong i.e. part backordered or shipment didn't come in and I won't get it on time then I understand that perfectly. It's when I spend a hunk load of money and get deliberately bullshitted when i get angry. So far Zach and Bryan @ TSP have been awesome and I hope it stays that way as I intend to use them again to buy all of the parts to build my 418 stroker when I get this combo finished.