View Poll Results: MS3 or FM13
MS3
92
46.70%
FM13
105
53.30%
Voters: 197. You may not vote on this poll
MS3 or FM13
#1
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: Western New York
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
MS3 or FM13
I know the two are a bit different but I have been debating the past few weeks on which cam I really want. Right now I have a stealth cam thats good for nitrous, but I dont have nitrous so it doestn do me any good. So I have decided the car will be a cam only car since Im in college and dont have a ton of $$. Which would I be happier with? thanks
#2
TECH Addict
iTrader: (27)
Personally, cam only I would run a G5X4, TRex or an MS4 over any of the ones you have listed. But, since there are only those 2 choices I chose the MS3!
Edit: N20 is cheaper than a proper large cam only setup. I would budget aside at least $1000 for the cam and supporting valvetrain mods (dual springs, timing chain, oil pump), another $300 for gears and install (4.10s in an M6) and another $500 for the tune. If you don't do the install yourself on the cam or gears I'd add another $1000 to that.
Edit: N20 is cheaper than a proper large cam only setup. I would budget aside at least $1000 for the cam and supporting valvetrain mods (dual springs, timing chain, oil pump), another $300 for gears and install (4.10s in an M6) and another $500 for the tune. If you don't do the install yourself on the cam or gears I'd add another $1000 to that.
#3
12 Second Club
Join Date: Nov 2005
Location: Cincinnati, OH
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Really I think either one would be a good choice. You want/need some gears to go with both. Both cams are proven performers. I chose the F13 mainly because it has the reputation as one of the best all-around street cams out there, also because my tuner highly recommended it to me. This poll should probably stay split about 50/50 because they both are so popular
Another thing to think about: Count on at least 2-3 months waiting on your cam from Futral. 10-14 day wait period? HA!!
Jeremy
Another thing to think about: Count on at least 2-3 months waiting on your cam from Futral. 10-14 day wait period? HA!!
Jeremy
#4
12 Second Club
iTrader: (2)
Join Date: Apr 2004
Location: Earth, I hope...
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Like stated above. The F13 and MS3 are both proven cams. I personally run the F14 and couldnt be happier! You wont be dissapointed either way. I think that the F13 would probally be more street friendly than the MS3.
Ski
Ski
#5
TECH Junkie
iTrader: (23)
Join Date: Aug 2003
Location: Tallahassee, FL
Posts: 3,467
Likes: 0
Received 0 Likes
on
0 Posts
Are you looking for more performance at the track or the street?
track -> MS3 (if matched properly, it can be a mean 1/4 mile cam)
street -> F13 (I have it, and I looooove the powerband)
track -> MS3 (if matched properly, it can be a mean 1/4 mile cam)
street -> F13 (I have it, and I looooove the powerband)
Trending Topics
#9
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: Western New York
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Well I have 410's that will be put in and I have a life tune at RPM. But it will definately be a street cam. Prolly alot more from roll racing than digs. thanks everybody
#13
TECH Addict
iTrader: (27)
Don't buy it used
Seriously though, I'm sure if you searched on here there might be some info on the cam card or something that would let you know if it was good or not. If not, maybe Futral could check it out for you before you purchased. If the person was serious about selling it they shouldn't mind doing that for a sale. Good luck
Seriously though, I'm sure if you searched on here there might be some info on the cam card or something that would let you know if it was good or not. If not, maybe Futral could check it out for you before you purchased. If the person was serious about selling it they shouldn't mind doing that for a sale. Good luck
#14
TECH Senior Member
iTrader: (4)
Originally Posted by 71camaro
IM leaning towards the fm13 but I have heard some horror stories of the bad batch cams, and If I buy it used how do I know if its a a bad one of a good one?
#15
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
I say the F13. I personally have a F14 in my Z06 and love it. I daily drive the car and it still gets great gas mileage if I keep my foot out of it. The cam has great power all around and runs like a beast!! I noticed the Futral cams seem to make more torque than the others. That new high lift is a beast making 10hp and 10 tq over the F14 in my car.
#19
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2005
Location: Farmington NH
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
well heres my personal experience... when i ordered my f13 it took about 6 weeks to get to me. Personally for me, this was completely unacceptable and f***ed up the start of my driving season... Now if you can wait that long and dont mind then by all means go with the f13 (great cam, decent power). However, if you want this thing in before the end of the summer you may want to look elsewhere
and dont start bitching at me about how much futral has helped the ls1 community and all the great products he does because the bottom line is their customer service sucks, with a capital S
and dont start bitching at me about how much futral has helped the ls1 community and all the great products he does because the bottom line is their customer service sucks, with a capital S
#20
TECH Apprentice
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: Western New York
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
LOL yeah I have heard they are a little lazy on the customer service side, and I work retail and CS is everything. But unfortunately in the auto performance world people can be real "shitty" in the CS area do to the fact that people will still by it almost no matter what. Thats why these clutch companies can charge $400+ for a damn clutch when in reality it doesnt cost half that to make. Sorry I almost hijacked my own thread.lol