View Poll Results: G5X3 vs. MS3
Voters: 139. You may not vote on this poll
G5x3 vs. MS3
#101
TECH Regular
Join Date: Mar 2006
Location: Rolesville, NC
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That is where the LSK lobe on intake will come into play. What i did is just swap the XE-R intake for a LSK one.
I'm contemplating running that cam in my 370 ci (A4)
108+3 will definately bring the power on much earlier, but it will be peaky and might not benefit from 7000 rpm blasts.
But with 29* overlap that WILL be insane
The VE.s look good, more exhaust biased. worth a try IMO
I'm contemplating running that cam in my 370 ci (A4)
108+3 will definately bring the power on much earlier, but it will be peaky and might not benefit from 7000 rpm blasts.
But with 29* overlap that WILL be insane
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Or what about an X3 110 on SWGT heads ?
Last edited by AU N EGL; 10-14-2007 at 07:07 AM.
#103
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Doug- We flycut the majority of our installs for a few reasons even though it isnt necessary. They will clear fine, but you have to remember, the volume of work we do, we have to idiot-proof the installs so the customer can bang the 3-2 miss-shift and not tap any valves at 8500
. If we didnt, that one customer would bend a valve or 8. Most people never have that issue, and the DIY Guy doing stuff at home knows what he is working on.
I will never turn anyone away from flycutting, and lets keep in mind that most of the time its necessary, just not with the combos everyone is asking about![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Wavrdr- this is a very common combo as you probably know. Rule of thumb is .055-.060 min. on the intake (thats close), and 80-100 on the exhaust. The more the merrier. With that setup (X3/114, 59cc AFRs and cometics) You are looking at ~ 80I/130E. Everyones setup will vary, but thats been the number.
Louis
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
I will never turn anyone away from flycutting, and lets keep in mind that most of the time its necessary, just not with the combos everyone is asking about
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Wavrdr- this is a very common combo as you probably know. Rule of thumb is .055-.060 min. on the intake (thats close), and 80-100 on the exhaust. The more the merrier. With that setup (X3/114, 59cc AFRs and cometics) You are looking at ~ 80I/130E. Everyones setup will vary, but thats been the number.
Louis