Hello,

I have hit my revlimiter last night, and is it possible to pull the pushrods out of the car with out removing the motor. And if I do pull the valve covers off and I going to need gaskets.

Tilly

 

pull the valve covers and take the rockers off theyll come right out....

i reused the valve cover gaskets....no problems

 

the valve covers have o ring gaskets so they can be reused.

 

so I can do all of this in one day. Or a Weekend ???

 

should only take about an hour to do.

 

After removing the push rod find s flat surface like a glass tabletop and roll them over it and you will see if any are bent. If any are go with a hardened push rod like a Manley or Comp.

 

You can but hitting the rev limiter should not harm anything, are you hearing any new noises?

 

no noise no harm no foul

 

Well, From what people are telling me, the noises my valvetrain is making is normal. And I have read that the LS1 valve trains are naturally noisy. I have just git the revlimiter a couple of times and got scared. I have purchased this car recently so I am still learning the ins and outs about it. Thank you for the help