Ms4 or V.3
#21
Banned
iTrader: (2)
Join Date: Oct 2003
Location: New York
Posts: 1,016
Likes: 0
Received 0 Likes
on
0 Posts
i have the ms4. My valvetrain is messed up right now so i cant give exact specifications..
but with a messed up valvetrain.. a REALLY BAD TUNE I beat a pace truck lightning with a bigger pulley and some other mods.
I have tea stage 3 heads though and 4.10's
but with a messed up valvetrain.. a REALLY BAD TUNE I beat a pace truck lightning with a bigger pulley and some other mods.
I have tea stage 3 heads though and 4.10's
#23
12 Second Club
iTrader: (1)
Join Date: Oct 2005
Location: shawnee,ks
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that's why I can't decide, good streetmanners less power, or MORE POWER slighty worse streetmanners.[/QUOTE]
that's the problem with me too...i drive my car every day which is why im leaning towards the ms3 instead of the ms4
that's the problem with me too...i drive my car every day which is why im leaning towards the ms3 instead of the ms4
#25
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2005
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
K found a local guy that has the MS3 rolled with him, was totally like he was driving a stock car till he hit the gas, the power was out on the low just a little but the top end just pulled like a rapped ape. So here is my deductive reasoning if the MS3=great street manners good power, the MS4= must be better because like the gentleman above said more power under the curve. Correcting the only (very small)complaint I had with the MS3.
#26
TECH Resident
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
yea but ms4 has some nasty .649 lift wont that kill springs much faster than a ms3 at .600 lift.
Anyone I talk to says thats too much lift for any kind of DD.
Anyone I talk to says thats too much lift for any kind of DD.
#27
TECH Fanatic
iTrader: (15)
Join Date: Dec 2005
Location: _Nor caL_ (Bay areA)
Posts: 1,588
Likes: 0
Received 0 Likes
on
0 Posts
dam it.. why is it so hard to choose a cam..lol
im debating wether to get the v2, v3 or the ms3.... ive decided the ms4 is to big... and heard some bad stories already.. but dont make ur decision that.. just my .02 cents...
i heard a v2 yesterday and man o man.. it sounded bad ***... on a 98 m6 car.. with bolt ons, ls6 intake, and the v2 he made 410rwhp.. thats pretty dam good to me... also ive always been told.. bigger isnt always better
im debating wether to get the v2, v3 or the ms3.... ive decided the ms4 is to big... and heard some bad stories already.. but dont make ur decision that.. just my .02 cents...
i heard a v2 yesterday and man o man.. it sounded bad ***... on a 98 m6 car.. with bolt ons, ls6 intake, and the v2 he made 410rwhp.. thats pretty dam good to me... also ive always been told.. bigger isnt always better
#28
TECH Enthusiast
iTrader: (10)
Join Date: Jan 2006
Location: Long Island, NY
Posts: 527
Likes: 0
Received 0 Likes
on
0 Posts
I plan on going with the torquer 2 also, but ppl. usually go with the whole "bigger is better theory" not always true.....i just want the torquer 2 for the choppy sound.....
#29
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2005
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
yes true for the ordinary DD i would actually go for a 224/228 .588 .588 but I'm not lookin for plain/ordinary I'm going to go big or go home. The motor will get heads and N20 soon, after the clutch and cam. I'm really going for 11's street trim. Plus I not lookin to buy a cam based on what it sounds like YOU CAN MAKE ANY CAM SOUND CHOPPY WITH THE CORRECT LSA.
#30
TECH Enthusiast
iTrader: (46)
Join Date: Dec 2005
Location: Atlanta, GA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Dont get a cam on based on how it sounds. I have no idea what the MS4 sounds like (Im sure its mean) and I have heard the MS3 and love it. However after speaking with Zack and doing A LOT of research i went with the MS4 and not because it was bigger. The cam is an overall improvement over the MS3. They are not that different from another. They are not like a Torquer cam vs. a TRex cam. If I dont like it I can always take it out and put a new one in. Sure I may loose a $100 or so but the experience and what I learn is priceless. You wont know how a cam will fit your driving habit untill you try it. Everyones opinion on streetability is soooooo different. Kind of like which exhaust is loud and which isnt. I have a small cam right now TR224 on 112. Totally like stock. I figured I try the other side of the spectrum. Plus after much research the MS4 seems like a good performing cam and not "just another big cam" As far as the massive lift on LSK lobes goes well just have to see. Back in the day when the beehive 918 came out people had the same worries. Today the 918s are run with more the the .600 max lift of the spring just fine. But im just rambling. I have the cam already install should happen next weekend or the weekend after and I will post results and personal feedback comparing the MS4 with the TR224.
#31
TECH Enthusiast
iTrader: (9)
Join Date: Dec 2004
Location: Charleston, SC
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
I just got my MS3 in my TA and i like it alot. It may have lost a little low end torque but it pulls hard up top and is easy to daily drive. Even tho it may have lost a little down low, i cant stop spinning tires now
#32
Retired Street Racer
iTrader: (49)
Originally Posted by BOWTIE
You sure you are talking about the torquer V3 and not the MS3?
The V3 is a relatively new cam just like the MS4.
The V3 is a relatively new cam just like the MS4.
#33
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2005
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Oh4GTO
Dont get a cam on based on how it sounds.
Hey MattD No worries my brother your imput was welcome... gave me the idea to seek out someone with the MS3 to see what that cam was all about.
#34
can you put the v3 in a higher milage car around 71k? I was wanting to buy the v3 with prc double springs and push rod set from tsp. Would it be ok to put that cam in this engine with higher miles? ALso what is involed in tuning a cam and should a local shop be able to do it? What do you tune it with?
#35
TECH Fanatic
iTrader: (3)
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by iwannarx7fd
can you put the v3 in a higher milage car around 71k?
Yes, many here have aftermarket cams in theirs with higher mileage 100k+
I was wanting to buy the v3 with prc double springs and push rod set from tsp. Would it be ok to put that cam in this engine with higher miles?
Get the double springs ,pushrods , camshaft , lifters , timingchain , oilpump uprade and your car will run like new
ALso what is involed in tuning a cam and should a local shop be able to do it?
Any Ls1Tech sponsored High Performance shop should be able to tune your car regardless of modifications .
EFI Live / HP Tuners What do you tune it with?
Yes, many here have aftermarket cams in theirs with higher mileage 100k+
I was wanting to buy the v3 with prc double springs and push rod set from tsp. Would it be ok to put that cam in this engine with higher miles?
Get the double springs ,pushrods , camshaft , lifters , timingchain , oilpump uprade and your car will run like new
ALso what is involed in tuning a cam and should a local shop be able to do it?
Any Ls1Tech sponsored High Performance shop should be able to tune your car regardless of modifications .
EFI Live / HP Tuners What do you tune it with?
#37
TECH Fanatic
iTrader: (3)
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
I would save a little more and buy the oil pump and lifters . The cam your talkin will rev higher than stock so its good to upgrade to fresh parts . Old lifter can go out and cost you alot, same for the old oil pump .
#38
TECH Fanatic
iTrader: (15)
Join Date: Dec 2005
Location: _Nor caL_ (Bay areA)
Posts: 1,588
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cws T/A
I would save a little more and buy the oil pump and lifters . The cam your talkin will rev higher than stock so its good to upgrade to fresh parts . Old lifter can go out and cost you alot, same for the old oil pump .
#40
will these work?
http://cgi.ebay.com/ebaymotors/COMP...040100439QQrdZ1
anywhere else I can find an upgrade for my oil pump and ls2 chain I see Texas speed has the ls2 chain for 35 is that the one I need? ALso they have the oil pump for 139 are these the parts I need?
http://cgi.ebay.com/ebaymotors/COMP...040100439QQrdZ1
anywhere else I can find an upgrade for my oil pump and ls2 chain I see Texas speed has the ls2 chain for 35 is that the one I need? ALso they have the oil pump for 139 are these the parts I need?