Sounds like 1998 LS1 Edit beta is out...
#3
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Heard is in MI, and I heard it was like $450 for a fullout tune... I would have preferred to hear it was $___per hr. Might still be, I have not talked to the shop directly.
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I agree with you PSJ, it should be based on per hour basis. If I wanted something changed next week at a shop it shouldn't cost me another $450 !
Doug
00 Pontiac
Doug
00 Pontiac
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There's a shop version that will be out that costs quite a bit more than the single version of course but is usable between LS1's. I'm sure shops around town will have it and sell hourly time with it. Oh I need it badly, theres so much that program will do for my car it is well worth $450 though.
[ January 21, 2002: Message edited by: MrTransAm ]</p>
[ January 21, 2002: Message edited by: MrTransAm ]</p>
Trending Topics
#8
On The Tree
Join Date: Nov 2001
Location: W.Palm Beach, Fl.
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has anyone heard about when it will be available to the public? Probably at least a year for the 98's. <img src="graemlins/gr_judge.gif" border="0" alt="[judgement]" />
#9
TECH Apprentice
Join Date: Nov 2001
Location: Indianapolis, IN
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
already talked to a shop that will be doing my PCM with it <img src="gr_images/icons/wink.gif" border="0"> just have to drive there
#10
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not a year, maybe a month after the single user 99-00 comes out. 97-98 is in Tuner Beta right now. They are going to be sending out a single user beta version of 97-98 soon. <img src="gr_grin.gif" border="0"> (hand raised) <img src="gr_grin.gif" border="0">
They are slowly, slowly, rolling out single user betas starting this week with one or two. They do not want to ship a bunch only to learn they have problems and have to bring it all back in.
After the single user betas get some seat time, then they'll do the full release. <img src="gr_stretch.gif" border="0">
This is status as of the emails I got earlier today...
-Andrew
They are slowly, slowly, rolling out single user betas starting this week with one or two. They do not want to ship a bunch only to learn they have problems and have to bring it all back in.
After the single user betas get some seat time, then they'll do the full release. <img src="gr_stretch.gif" border="0">
This is status as of the emails I got earlier today...
-Andrew
#11
TECH Addict
Join Date: Nov 2001
Location: St Louis, MO
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I can hardly wait for the '99 single user. I've been saving my money (and waiting to install my cam) hoping that it will be out soon.
Eric <img src="graemlins/corvette.gif" border="0" alt="[Corvette]" />
Eric <img src="graemlins/corvette.gif" border="0" alt="[Corvette]" />
#13
TECH Apprentice
Join Date: Jan 2002
Location: Murphy, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[quote]Originally posted by highgear:
<strong>Someone on another Board said a Performance Shop in Lewisville, Tx had it.
Maybe they will jump in here with the info. <img src="gr_grin.gif" border="0"> </strong><hr></blockquote>
That would be Speedworks. Coming to other local shops too <img src="gr_grin.gif" border="0">
<strong>Someone on another Board said a Performance Shop in Lewisville, Tx had it.
Maybe they will jump in here with the info. <img src="gr_grin.gif" border="0"> </strong><hr></blockquote>
That would be Speedworks. Coming to other local shops too <img src="gr_grin.gif" border="0">
#15
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Campbellini, it's out at three shops thus far.
I talked to one of them on the fone, APG in MI. It's the closest one to me... 5 hrs or so.
I talked to one of them on the fone, APG in MI. It's the closest one to me... 5 hrs or so.
#16
TECH Apprentice
Join Date: Nov 2001
Location: Sterling Heights Mi
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That's APE John. http://www.ap-engineering.com/ 586.954.3181
#17
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looks like our local guy has it too...
BV Performance (formerly Zap)
I'll most likely get together with him and do some dyno tuning.
BV Performance (formerly Zap)
I'll most likely get together with him and do some dyno tuning.
#18
D(irecto)r Pepper
Join Date: Nov 2001
Location: Houston Raceway Park...in TEXAS.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tuning: What all can LS1 Edit do?
Engine Functions: Base Spark
Spark Advance
Knock retard
Power enrichment
7 fuel tables
injector size
engine size
MAF size
Idle speed
Rev limit
Torque management
General:
Cooling fan on/off
VATS disable
Differential gear size
Tire size
Top speed limit
Electronic throttle hysteresis (corvette only)
EGR system on/off
Air pump on/off
EVAP on/off
A/C system on/off
ABS system on/off
Transmission: Shift speed
Shift firmness
Torque converter lock up
Manual skip shift
I have only one word to say.
***drool***
<img src="gr_stretch.gif" border="0"> Man once the individual tuners get ahold of this... "Katy, bar the door..."
Campbellini
Engine Functions: Base Spark
Spark Advance
Knock retard
Power enrichment
7 fuel tables
injector size
engine size
MAF size
Idle speed
Rev limit
Torque management
General:
Cooling fan on/off
VATS disable
Differential gear size
Tire size
Top speed limit
Electronic throttle hysteresis (corvette only)
EGR system on/off
Air pump on/off
EVAP on/off
A/C system on/off
ABS system on/off
Transmission: Shift speed
Shift firmness
Torque converter lock up
Manual skip shift
I have only one word to say.
***drool***
<img src="gr_stretch.gif" border="0"> Man once the individual tuners get ahold of this... "Katy, bar the door..."
Campbellini
#19
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thunder Racing has it on the way. Jsears8 ('98 model car) will be dynoing his "new" mod hopefully on Saturday. <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> Geoff will tune it, if need be.
Angie's Z28 picked up ~15rwhp after Geoff tuned it a month on the dyno using the software and the wideband O2 sensor. Just goes to show you what this software can do in the right hands!
Angie's Z28 picked up ~15rwhp after Geoff tuned it a month on the dyno using the software and the wideband O2 sensor. Just goes to show you what this software can do in the right hands!