Hammer Cam Results!!!!!!!!!!!!
Thread Starter
TECH Apprentice
Joined: Nov 2001
Posts: 317
Likes: 0
From: Humble,Tx
Hammer Cam Results!!!!!!!!!!!! Hey guys. I ran my car on the dyno the other day after my Hammer cam install. The car is a 2001 bolt on A4. The final numbers are skewed a bit by a rev limiter spike.
But the numbers I think are dang good.
There were no dyno tricks done to get these numbers.
Look at the Green and Black lines. Dang I love looking at that graph! 390 rwhp in a bolt on A4? I went 11.69 with the bolt ons. I’m looking for MUCH better with this extra 70 rwhp!
You can go to my web site to see what has all been done to the car, but it is just a bolt on car with a cam. Boy I can't wait to get the cage in the car.
Let the wars Begin <img src="graemlins/gr_punch.gif" border="0" alt="[fight]" />
[ March 06, 2002: Message edited by: Nine Ball ]
[ March 06, 2002: Message edited by: steve350 ]</p>
But the numbers I think are dang good.
There were no dyno tricks done to get these numbers.
Look at the Green and Black lines. Dang I love looking at that graph! 390 rwhp in a bolt on A4? I went 11.69 with the bolt ons. I’m looking for MUCH better with this extra 70 rwhp!
You can go to my web site to see what has all been done to the car, but it is just a bolt on car with a cam. Boy I can't wait to get the cage in the car.
Let the wars Begin <img src="graemlins/gr_punch.gif" border="0" alt="[fight]" />
[ March 06, 2002: Message edited by: Nine Ball ]
[ March 06, 2002: Message edited by: steve350 ]</p>
TECH Regular
Joined: Nov 2001
Posts: 455
Likes: 0
From: San Antonio, TX
Re: Hammer Cam Results!!!!!!!!!!!! Re: Hammer Cam Results!!!!!!!!!!!! About 390 rwhp SAE corrected with stock heads, through an A4. NOT BAD. Mark one up for the "small duration cam guys"
Tony
"bigger cams are not always better"
Tony
"bigger cams are not always better"
SSU Moderator
Joined: Nov 2001
Posts: 4,857
Likes: 0
From: Austin, TX
Re: Hammer Cam Results!!!!!!!!!!!! hahahah....GREAT numbers. besides the FLP headers this is the same combo that I going with (except the LS6 intake). I wonder if i can reach 365 or so through a locked Vigi3200 and 3.23's. hmmm..
GREAT numbers. <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0">
GREAT numbers. <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0"> <img src="gr_grin.gif" border="0">
Trending Topics
D(irecto)r Pepper
Joined: Nov 2001
Posts: 1,952
Likes: 0
From: Houston Raceway Park...in TEXAS.
Re: Hammer Cam Results!!!!!!!!!!!! No, he has had no PCM tuning done other than HPP3 stuff.
Freaking bad *** for what all has been done to the car!
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> Hammer Cam.
Freaking bad *** for what all has been done to the car!
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> Hammer Cam.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Re: Hammer Cam Results!!!!!!!!!!!! Awesome numbers Steve!! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
I've seen HEAD and cam cars not put down dyno numbers like that!
Congrats!! I'm right behind you with a cam install, lookout!!
<img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
I've seen HEAD and cam cars not put down dyno numbers like that!
Congrats!! I'm right behind you with a cam install, lookout!!
<img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
TECH Regular
Joined: Mar 2002
Posts: 407
Likes: 0
From: Wylie, TX
Re: Hammer Cam Results!!!!!!!!!!!! [quote]Originally posted by Raughammer:
<strong>No, he has had no PCM tuning done other than HPP3 stuff.
Freaking bad *** for what all has been done to the car!
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> Hammer Cam.</strong><hr></blockquote>
Thats pretty impressive that that A4 idles with no PCM tuning. Did you tap the TB or raise the idle screw on the TB?
<strong>No, he has had no PCM tuning done other than HPP3 stuff.
Freaking bad *** for what all has been done to the car!
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> Hammer Cam.</strong><hr></blockquote>
Thats pretty impressive that that A4 idles with no PCM tuning. Did you tap the TB or raise the idle screw on the TB?
TECH Enthusiast
Joined: Jan 2002
Posts: 559
Likes: 0
From: West Monore
Re: Hammer Cam Results!!!!!!!!!!!! Those are great numbers for an automatic. I have a 99SS with GS Heads and a cam-----and dyno only 391.5 H.P. But I do have a 3200 Vig converter with takes some HP away per my understanding. I wish I had more, but I guess that's the way it is for me. Anyway, those are some very great numbers and your car is very fast. Good luck in the future at the track.
