Update on MMS Stage 2 h/c 224 v3.1
#1
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Update on MMS Stage 2 h/c 224 v3.1
As requested by a few folks on my original post, here is the url which shows the before and after dyno numbers on my '01 c5 A4:
http://www.mmsracing.com/dyno_charts...gary_brown.GIF
The original post was misleading on the "before" numbers: the before torque was not 339 - it was 302. The 339 reading was a spike due to converter when going from 1-2.
Corrected before: 296 rwhp, 302 rwtq
After: 380 rwhp, 356 rwtq
Hope this information helps. Also, these numbers accomplished with a PT 2400.
An ST 3500 is on the way! <img src="gr_grin.gif" border="0">
gary
http://www.mmsracing.com/dyno_charts...gary_brown.GIF
The original post was misleading on the "before" numbers: the before torque was not 339 - it was 302. The 339 reading was a spike due to converter when going from 1-2.
Corrected before: 296 rwhp, 302 rwtq
After: 380 rwhp, 356 rwtq
Hope this information helps. Also, these numbers accomplished with a PT 2400.
An ST 3500 is on the way! <img src="gr_grin.gif" border="0">
gary
#2
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
Oops, I my puter doubled the url for some reason. Ahh, another senior moment! <img src="gr_emb.gif" border="0">
http://www.mmsracing.com/dyno_charts..._brown.GIFhttp
gary
http://www.mmsracing.com/dyno_charts..._brown.GIFhttp
gary
#3
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
#4
TECH Apprentice
Join Date: Nov 2001
Location: San Luis Obispo, Ca
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
Sweet results!! That is the same setup I am planning to go with pretty soon. Did you get any tuning from MMS? Again, awesome numbers man!
-dan
-dan
#5
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
[quote]Originally posted by dan98z:
<strong>Sweet results!! That is the same setup I am planning to go with pretty soon. Did you get any tuning from MMS? Again, awesome numbers man!
-dan</strong><hr></blockquote>
Dan - oh yeah! Mike did the tuning. One of the advantages for me is that MMS is right over the hill from where I live. Having Derek to the install and Mike do the tuning makes me very grateful.
I talked with Mike today. He says that when we put in the ST 3500 that I may be a bit surprised at the new rwhp numbers. I can't wait! <img src="gr_grin.gif" border="0">
gary
<strong>Sweet results!! That is the same setup I am planning to go with pretty soon. Did you get any tuning from MMS? Again, awesome numbers man!
-dan</strong><hr></blockquote>
Dan - oh yeah! Mike did the tuning. One of the advantages for me is that MMS is right over the hill from where I live. Having Derek to the install and Mike do the tuning makes me very grateful.
I talked with Mike today. He says that when we put in the ST 3500 that I may be a bit surprised at the new rwhp numbers. I can't wait! <img src="gr_grin.gif" border="0">
gary
#6
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
P.S. I find myself wishing I had the same weight transfer in my c5 that you guys get in your f-bodies. Hopefully, some HALS on the front and losing the front stabilizer bar will help me see a bit of the sky at launch!
gary
gary
#7
TECH Veteran
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
Gary looks good! Are you going to have that stall in by Friday? I'm looking forward to lining up with you at Pomona. <img src="gr_images/icons/wink.gif" border="0">
Trending Topics
#8
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
Hi Terry. Just saw your new numbers - awesome! <img src="gr_grin.gif" border="0">
I have a meeting that I am trying to re-schedule so that I can go out on Friday but I will definitely be there on Saturday morning.
I also look forward to learning from one of the masters if we wind up side-by-side! Hope I dial in right! <img src="graemlins/gr_guns.gif" border="0" alt="[guns]" />
gary
I have a meeting that I am trying to re-schedule so that I can go out on Friday but I will definitely be there on Saturday morning.
I also look forward to learning from one of the masters if we wind up side-by-side! Hope I dial in right! <img src="graemlins/gr_guns.gif" border="0" alt="[guns]" />
gary
#9
On The Tree
Thread Starter
Join Date: Jan 2002
Location: california
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: Update on MMS Stage 2 h/c 224 v3.1
P.S. Terry - I won't have the stall by Friday. Al said that it may be two or more weeks but he's working on it. You should get yours before.
gary
gary