New T1 cam installed today
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Kemah, TX
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
New T1 cam installed today
Was going to go with the Hammer cam but MTI was out so I went I went with the T1. Turned out pretty good though. I only had a lid and the Corsa exhaust, no heads, or headers yet. Baseline dyno was 318.6 hp and 344.1 torque. This is an A4. After T1 cam and tuning with LS1Edit it dynoed a good 349-350 hp with a peak of 354.5. Peak torque is the same at 344 but at 6000 rpm it is 305 compared to 272 with the stock cam. Lots more area under the curve. Also at 6000 rpm it is more than 37 hp over the stock cam. All above numbers are corrected. As soon as I can dig my scanner out from under all this junk I can get the dyno sheet scanned in.
Note to self: Get a converter and some headers. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Les
Note to self: Get a converter and some headers. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Les
#5
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Kemah, TX
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Re: New T1 cam installed today
Thanks Vince. I ended up with more HP than I figured I would with no headers.
Trevor,I think a Yank ST3500 converter would be appropriate. That of course, and some really sticky tires. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Hey Josh, when you gonna put something together again?
Les
Trevor,I think a Yank ST3500 converter would be appropriate. That of course, and some really sticky tires. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Hey Josh, when you gonna put something together again?
Les
#6
SSU Moderator
Join Date: Nov 2001
Location: Austin, TX
Posts: 4,857
Likes: 0
Received 0 Likes
on
0 Posts
Re: New T1 cam installed today
[swammy] I see SES lights in your future.. [/swammy]
try a vig instead. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
try a vig instead. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Trending Topics
#8
TECH Senior Member
Join Date: Nov 2001
Location: Friendswood,TX
Posts: 8,423
Likes: 0
Received 0 Likes
on
0 Posts
Re: New T1 cam installed today
Les I am busy with work right now. Maybe we can do something the end of June. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> So how is that cam going to do with the new emissions testing?