Could the people who dyno'd over 400rwhp minus cutout come inside.
#61
Re: Could the people who dyno'd over 400rwhp minus cutout come inside.
Im going to be dynoing and retuning again soon. Just made the switch back to a six speed from my 200R.
Made 385RWHP And 439RWTQ through the A4 unlocked and ran 122.6mph through full exhaust.
With the M6 I am expecting around 41X-42XRWHP through the 12 bolt with 4.11's with tuning through full exhaust on 17 inch rims with no dyno tricks.
Stock clutch is already starting to give a little with only street driving. Hoping it can hold on the dyno.
Cheers,
Chris
<small>[ July 29, 2002, 10:38 AM: Message edited by: Chris ARE 360 ]</small>
Made 385RWHP And 439RWTQ through the A4 unlocked and ran 122.6mph through full exhaust.
With the M6 I am expecting around 41X-42XRWHP through the 12 bolt with 4.11's with tuning through full exhaust on 17 inch rims with no dyno tricks.
Stock clutch is already starting to give a little with only street driving. Hoping it can hold on the dyno.
Cheers,
Chris
<small>[ July 29, 2002, 10:38 AM: Message edited by: Chris ARE 360 ]</small>
#62
Re: Could the people who dyno'd over 400rwhp minus cutout come inside.
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Chris ARE 360:
<strong>Im going to be dynoing and retuning again soon. Just made the switch back to a six speed from my 200R.
Made 385RWHP And 439RWTQ through the A4 unlocked and ran 122.6mph through full exhaust.
With the M6 I am expecting around 41X-42XRWHP through the 12 bolt with 4.11's with tuning through full exhaust on 17 inch rims with no dyno tricks.
Stock clutch is already starting to give a little with only street driving. Hoping it can hold on the dyno.
Cheers,
Chris</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Chris, what kind of bottomend do you have?
<strong>Im going to be dynoing and retuning again soon. Just made the switch back to a six speed from my 200R.
Made 385RWHP And 439RWTQ through the A4 unlocked and ran 122.6mph through full exhaust.
With the M6 I am expecting around 41X-42XRWHP through the 12 bolt with 4.11's with tuning through full exhaust on 17 inch rims with no dyno tricks.
Stock clutch is already starting to give a little with only street driving. Hoping it can hold on the dyno.
Cheers,
Chris</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Chris, what kind of bottomend do you have?
#63
Re: Could the people who dyno'd over 400rwhp minus cutout come inside.
oops
Forgot to mention, ARE 360 with flatop pistons in the hole slightly (with valvereliefs. 3.905 bore with 3.72 stroke.)
Just posting this cause it will be interesting to see the differences between the A4 numbers and M6 <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris
Forgot to mention, ARE 360 with flatop pistons in the hole slightly (with valvereliefs. 3.905 bore with 3.72 stroke.)
Just posting this cause it will be interesting to see the differences between the A4 numbers and M6 <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris
#66
Thread Starter
Shorty Director
iTrader: (1)
Joined: Nov 2001
Posts: 8,260
Likes: 4
From: Valrico, Florida
Re: Could the people who dyno'd over 400rwhp minus cutout come inside.
28 peeps it looks like now. Eric you are right there. I know you are unhappy right now. I'm not the happiest person either with my setup, but the choice was mine. Eric you might or might not have something else going on with your setup. Your tq is fine and your horsepower is close.. Have you had ls1edit done yet?
#67
Re: Could the people who dyno'd over 400rwhp minus cutout come inside.
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by VINCE:
[QB]28 peeps it looks like now. [QB]</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">29 now <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
[QB]28 peeps it looks like now. [QB]</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">29 now <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />