137.1K miles-Compression reading results
#25
TECH Fanatic
iTrader: (3)
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by SHINER
dry or wet? I unplugged the fuel injectors, so....i guess dry
However, since your readings are within spec there really is no need for wet compression test.
Rings, valve guides and valve seals will cause oil burning nothing to do with the condition of your engines bearings. You can easily upgrade to better heads and parts but in the end you still have a 100K+ mile shortblock. I would perform a leakdown test to see the real condition of the motor.
#26
TECH Veteran
Thread Starter
iTrader: (18)
Join Date: Sep 2005
Location: SW Houston
Posts: 4,192
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Ryan02SS
You performed a dry test. A wet test would be squirting a tablespoon of oil into the CC thru the sparkplug holes. Retest. If the pressure goes higher than your dry readings you can usually pinpoint the rings being the culprit.
However, since your readings are within spec there really is no need for wet compression test.
Rings, valve guides and valve seals will cause oil burning nothing to do with the condition of your engines bearings. You can easily upgrade to better heads and parts but in the end you still have a 100K+ mile shortblock. I would perform a leakdown test to see the real condition of the motor.
However, since your readings are within spec there really is no need for wet compression test.
Rings, valve guides and valve seals will cause oil burning nothing to do with the condition of your engines bearings. You can easily upgrade to better heads and parts but in the end you still have a 100K+ mile shortblock. I would perform a leakdown test to see the real condition of the motor.