Smoke_ur_5.0

iTrader: (2)

I am very sad to announce that we have not been dealing with EMT racing aka Shandy Price for over a month now. After receiving a set of really good heads from Shandy I had several orders for him to fill and had him backordered for more sets like mine. Unfortunately Shandy decided to skip town and not only put me in a very difficult situation but also took several others heads and money. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />

Here is why I am strongly warning those fo you out there. One individual who dealt with Shandy directly is out $2000 and a set of LS6 heads. I am also out money and a set of cores. Another customer just notified me he didn't put on the titanium retainers that were promised (stock ones instead) I put a little pressure(calling daily) on Shandy after a long 3 month wait on the heads that were to only take a couple of weeks and Shandy gave me excuses and eventually would not answer the phone. A few weeks after calling the number daily I finally got through to a female claiming Shandy was in the middle of moving...shortly thereafter the number was disconnected.

What's worse is I was making $0 off the few sets of heads he was to do for me....so in turn for me sticking my neck out for Shandy, I got the shaft. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />

I do think he meant well in the beginning but he obviously screwed up. So if you happen to know Shandy Prices' whereabouts please contact me at 913-393-1157. Me and several others(including the law) need to straighten some things out with him. If you are reading this Shandy it would be in your best interest to straighten this out quickly and personally before a few of us have to take further measures.

From now on, I have entitled all head porting work to Craig Gallants outfit (GTP) and have been extremely satisfied with his turn around and prompt service.

Sorry for taking up space and do not like to make the company affairs public, but after being a longtime LS1.com convert to LS1tech.com resident, I don't want to see another person getting the shaft that few of us have.

Mark

<small>[ September 03, 2002, 08:59 PM: Message edited by: Smoke_ur_5.0 ]</small>

Smoke_ur_5.0

iTrader: (2)

on another note..if you are another one of the many that are out money or heads from Shandy please call me also and let me get your information to help serve justice.

Last known address for Shandy Price was

43776 Big Fall Creek Road
Fall Creek, OR 97438

and frequented the Houston area before he moved to Oregon.

kick_*ss

iTrader: (1)

You have mail

VINCE

iTrader: (1)

I am sorry to hear about this Mark.. It is hard to find honest people in the business.. Good Luck.. P.S. Do not use Flow Technics heads..

Damian

iTrader: (89)

Damn Mark, that sucks bro. Really shitty to see a man like yourself get shafted over something you couldn't control. If you ever do see the guy, stomp a mudhole in his *** and then get your money back <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Josh

35th SS

iTrader: (2)

sorry to hear that Mark.I was one of your customer suppose to be waiting for those heads but never came.but we got that straighten out.thanks.hope you catch up with that person.btw the asp pulley you sent is working great.than <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> ks again.

Air21

I talked to him on the phone a couple of times and he mentioned he had a few friends at MTI. Possible give a call over there?

gator's 99TA

iTrader: (2)

sorry about that mark. i have followed your struggles throughout this whole deal with Price. he made an amazing head, esp making huge power with smaller cams, but no one likes a punk running. with all the contacts in houston area someone should know about his whereabouts. we all need to take responsibility.

it is very cool of you to be the better man and cut your loses now. he will be found! <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" />

Fenris Ulf

Man that really sucks Mark. Craig is an awesome guy and ports an excellent LS1 head, can't go wrong with him!

Smoke_ur_5.0

iTrader: (2)

Thanks for the support guys. I've got a few good leads from some of you out there.

Mark

383ss

iTrader: (14)

good luck Mark. Sorry to hear about people out there getting screwed over <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> especially someone trying to just get started.

Smoke_ur_5.0

iTrader: (2)

Thanks John <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Jantzer98SS

iTrader: (54)

Need a hitman? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> Let me think about it Mark, but there is a shop in Eugene that does prostock engine work and Shandy has his heads flowed on their SF1020. I'll find the name of the shop and try and get a number. Maybe they've heard from him.

Scott

GODUCKS

If I hear about him being around Portland, I'll get him for you <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />

Smoke_ur_5.0

iTrader: (2)

Thanks for the help. I have found out that he hasn't moved anywhere. Still lives there just trying to avoid any contact with the people he screwed.