Finally I want to choice a new cam for my stock heads ..

What is the best , aggressive cam with stock heads for street race ....

I want cam from 600 to 800 metres .

Fahad ...

 

Thunder Racing 224cam is great
get it with a 112lsa if you have the six speed or 114las if you have a auto trans

 

224/112 <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" /> <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by thechef:
<strong>Thunder Racing 224cam is great
get it with a 112lsa if you have the six speed or 114las if you have a auto trans</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I have M6 / 98 ..

What is the RWHP / TRQ i can got it about this cam ( TR 224 ) on stock heads ....

Are you tried this cam or what ..

Thanks ..

Fahad ...

<small>[ September 07, 2002, 09:48 AM: Message edited by: Fahad ]</small>

 

Fahad,

Take a look (search) farther down in the Internal Engine posts (check the "next" pages in addition to the first page that you're looking at)....

There are a few listings of peoples experiences with the 224/112.

It sounds like a real nice overall cam for mostly stock.

 

Hi ,

I have videos and sounds for many cams , but i can't choice one of them ..

NOTE : In kuwait we have LS1's some of them install cams like MMS/229 - C2 - Lunati... <img border="0" alt="[kaboom]" title="" src="graemlins/gr_bomb.gif" />

Now about 224/112 TR , what i can got RWHP from this cam and can i find better than 224/112 for stock heads ...

Thanks

Fahad ..

 

TTTTTT

 

that cam puts down about 400rwhp look on thunder racings web site.................>
and they list a dyno graph and the parts that were on the car to make that power look.......>

 

read the other posts in this forum there are lots of cam opinoins sound clips etc...

 

I just put in a 224 on a 114 center though. I wanted a bit smoother idle for the sleeper effect. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Most people who use this cam with a lid and long tube headers will get 40-50 horse at the wheels, with stock heads! Thunder racing cams are where its at! Great driveability, and huge gains.

Get one.

 

Thanks thechef ...

I have all the sites but how to find someone tried the cam .

Fahad...

<small>[ September 10, 2002, 12:19 PM: Message edited by: Fahad ]</small>

 

Thanks .. Greg Fell .. I will try to got one from Thunder racing

Fahad ..

 

I agree.. TR224

 

Fahad,
People were willing to help you with your cam selection, but neglected to assist you with a couple grammatical errors in your posts. One chooses a cam, not choice it. You should also say I want to get something, not got something. Otherwise someone might suspect you are a terrorist, and we wouldn't have that <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> .
Regards,

 

Cut the guy a break ...
English is obviously NOT his first language.

 

Salam Fahad,
I told adnan about your cam, the best for your application is 224/114 or 112
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> good luck my friend!
Ahmad

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by mitchntx:
<strong>Cut the guy a break ...
English is obviously NOT his first language.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thank you <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by ArcticFormula:
<strong>Fahad,
People were willing to help you with your cam selection, but neglected to assist you with a couple grammatical errors in your posts. One chooses a cam, not choice it. You should also say I want to get something, not got something. Otherwise someone might suspect you are a terrorist, and we wouldn't have that <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> .
Regards,</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">this reply was out of line, especially the last sentence.

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by mitchntx:
<strong>Cut the guy a break ...
English is obviously NOT his first language.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thanks mitchntx ..

Fahad

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by The Emperor Of Darkness:
<strong>Salam Fahad,
I told adnan about your cam, the best for your application is 224/114 or 112
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> good luck my friend!
Ahmad</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Hala Ahmad .. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Adnan told me about your advice , but did you a gree with C2 ON STOCK HEADS ??

I found many cams for stock heads like :

1- 227/224 .569/.563 114 LSA 2200-6800 RPM

2- C1 222 222 .566 .566 112 .

Before two days I was found someone install cam so Different about them he is :

222/222 595/595 112 or 114 I don't remember exactly a bout lobe and on stock heads .

Now i don't know who is the best on stock heads and RWHP ?? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

Fahad ..