Billiumss

iTrader: (11)

I placed my order with Absolute Speed for some Stage 2 heads.

After talking to Jay, I told him that I would like to milled the heads .010 to "clean them up".

He said that I would be getting "new" heads and it wouldn't be required, but would do it if I wanted. I told him to go ahead and mill them .010.

I am going to be using a TR 224 Cam with a 114 lsa.

If I have them milled .010 should I use 7.40 pushrods?

What do you guys think???

Thanks in advance for the comments...

Bill

Reckless

iTrader: (9)

Stock length pushrods should be fine Bill (7.4"), but make sure you get hardened ones. A 10-thou milling should be no issue at all with that cam. When you gonna get them?

Billiumss

iTrader: (11)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Reckless:
<strong>Stock length pushrods should be fine Bill (7.4"), but make sure you get hardened ones. A 10-thou milling should be no issue at all with that cam. When you gonna get them?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Cool...

Should be getting the heads the first week of December and everything else right after Christmas... <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />