dropping motor back in question (wrong section?)
dropping motor back in question (wrong section?) Can i put all the accessories back on the motor like the ud pulley, water pump, ac pump, and everything else that goes on the front of the motor, and put the motor back in from the top. I just want to know what is the easiest way to get it back in. My buddies and I took all the **** off when we pulled it out, but if we can get away with put everyhting back on and dropping in it that be awesome. Remember we are dong it from the top as well.
TECH Enthusiast
Joined: Jun 2006
Posts: 594
Likes: 0
From: Enid, OK
I doubt it. I took mine out from the top and the crank snout barely cleared with turning the motor to the side. Add the crank pully on that and I dont think ull have enough room. i even took my intake manifold off for added clearence up top. I definatly wouldnt put the powersteering on as ull need the bolt holes in the head to lift the motor.
Trending Topics
Originally Posted by SPRAYED 01
You can pull it out with the heads? I thought it had to be a short block coming from up top.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
