need everybody's opinion!
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Dec 2005
Posts: 630
Likes: 0
From: NW Suburbs IL
need everybody's opinion! ive been trying to decide on a cam but i just cant do it! i have a 02 ls1 with a 6-speed......what i want from the cam is a nasty sound very lopey but also very good power want over 400 at the wheels. i may also be doing a set of ported 241 heads. this is also pretty much a DD (when its nice out). ive been starting to lean towards a custom ground.......tell me what you think.
-dave-
-dave-
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: Apr 2005
Posts: 106
Likes: 0
From: the South
Originally Posted by pro2low
i was thinking 233/239 on a 112 with ported ls1 heads. not positive though
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Why does the lift scare you?
LSK lobes are easier off the seat at .006 but a bit steeper at .200 lifts, that is all.
TV3, MS4 and many others are using LSK lobe on intakes.
With the right spring, there is nothing to be affraid, or thinking more damage would result than a .600 lift |XE-R|
LSK lobes are easier off the seat at .006 but a bit steeper at .200 lifts, that is all.
TV3, MS4 and many others are using LSK lobe on intakes.
With the right spring, there is nothing to be affraid, or thinking more damage would result than a .600 lift |XE-R|
