Forged 347 Cam Advice. Please Help
#1
TECH Enthusiast
Thread Starter
iTrader: (71)
Join Date: Dec 2006
Location: Chattanooga,TN
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Forged 347 Cam Advice. Please Help
What cam would you guys suggest in a forged 347 with flat top Mahle pistons and rods, stock crank, ls6 intake, pulleys, longtubes, and just really full bolt ons. I am either going with ls6 stage 2 heads or maybe TEA stage 2 heads. Neither have been milled. What cam would make the most power and good rpm and torque range?
#6
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1999ssls1
What kind of power do you think the cam I have now would make. Its a comp 597-610-234-243 on a 110. How much does balancing run?
Trending Topics
#16
TECH Addict
iTrader: (22)
What do you plan on doing with the car??? Is it a DD or a track only car or a weekend car??
What gears in the rear?? Tranny? Are you going to spray it?? All Motor??
All of these are questions that need to be answered before any valid cam can be suggested. Other than that they are just shots in the dark.
What gears in the rear?? Tranny? Are you going to spray it?? All Motor??
All of these are questions that need to be answered before any valid cam can be suggested. Other than that they are just shots in the dark.
#18
TECH Enthusiast
Thread Starter
iTrader: (71)
Join Date: Dec 2006
Location: Chattanooga,TN
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Mods are:
M6
3.73s
ls6 intake
42 lb injectors
pulleys
longtubes
ported tb and maf
lid
loudmouth exhaust
forged piston and rods
stock crank
etc
This is a weekend car only. I am wanting to spray it occasionally. Maybe a 150-200 shot. This probably going to be with cnc ported ls6 heads.
M6
3.73s
ls6 intake
42 lb injectors
pulleys
longtubes
ported tb and maf
lid
loudmouth exhaust
forged piston and rods
stock crank
etc
This is a weekend car only. I am wanting to spray it occasionally. Maybe a 150-200 shot. This probably going to be with cnc ported ls6 heads.
#19
On The Tree
iTrader: (4)
Join Date: Apr 2006
Location: Winston-Salem, NC
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
It really depends on what you want. What was your old set up, did you have a cam in it, if so what were the specs and how did you like it? So guys like smaller cams, some like bigger cams, it just depends on what you are using it for and what you want out of it. As far as off of the shelf big cams, MS4, Vindicator, G5X4 etc. have made good numbers and good times. I personally went with a Vindicator.
The next step smaller, G5X3, Torquer, F13, F14, etc. have all been proven performers. This might be the range that you want to consider if you are wanting a "good rpm and torque range". The G5X3 is a great cam.
The next step smaller, G5X3, Torquer, F13, F14, etc. have all been proven performers. This might be the range that you want to consider if you are wanting a "good rpm and torque range". The G5X3 is a great cam.
#20
TECH Enthusiast
Thread Starter
iTrader: (71)
Join Date: Dec 2006
Location: Chattanooga,TN
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
This is a weekend car only. I am wanting to spray it occasionally. Maybe a 150-200 shot. This probably going to be with cnc ported ls6 heads. The old cam was 234-243-597-610 on a 110