Torquer V2 Idle Vid clip
Heres a clip punching it at 15mph until about 65
And before anyone says anything, yes I know its a school zone, its right by my house and it was after 6pm in the summer and there was no one around, I wouldnt drive that fast by there when schools in session
And before anyone says anything, yes I know its a school zone, its right by my house and it was after 6pm in the summer and there was no one around, I wouldnt drive that fast by there when schools in session
We dont have any dynos close to here : (
I am more interested in track times, I will hopefully get some runs in over the next few weeks
I am going to ditch the ory and put some highflow cats on it over the winter both to make it easier to get inspected and hopefully quiet it down a little : )
I am more interested in track times, I will hopefully get some runs in over the next few weeks
I am going to ditch the ory and put some highflow cats on it over the winter both to make it easier to get inspected and hopefully quiet it down a little : )
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
ur car sounds very nice with the magnaflows.
i have the same cam and almost the same mods that this guy has and i run a 12.71@115mph with a crappy driver.
Originally Posted by BayAreaSS
Sounds good.
I'm interested in this cam. I would like to see what you run at the track
I'm interested in this cam. I would like to see what you run at the track
Originally Posted by bad6as
fyi this cam has 9* of overlap
232/234 112 right?
232/234 112 right?
yes sir, and it ran 12.8s before the cam and stall so I am hoping for low low 12s / high 11s now
as far as driveability with this cam other than hunting for idle the first min or two upon start up its fine................
I hear it wont like the cold weather but I put it away about late Oct until late April so its really not an issue for me
I hear it wont like the cold weather but I put it away about late Oct until late April so its really not an issue for me
1st gear rolling at about 15mph I punched it, stayed into it until about 60, didnt want to **** the neighbors off too much, you can hear me let off at the end
just goosing the throttle at idle, it breaks the Mickey Thompsons loose with little effort, before its recent mods it would only break em loose by power brakeing it
I have a shitty camera that only takes like 15 second clips and the sound quality isnt great but its all I got
On The Tree
Joined: Jul 2007
Posts: 146
Likes: 0
From: Borger,TX
another idea just a suggestion i may offer for those of u who r lookin at gitting a cam......i just got done installing and dynoing the Torquer V.3 in my M6 02 T/A it's cam is awesome tomorrow i plan on making new video clip of it running since i got it tuned.....and i got copy of dyno charts if any of u r interested in them.....just tryin to throw some more options out there for u
just fyi these clips are with a zo6 maf that the car was not tuned for, I have a stock one on there now and it idles a little smoother and seems to pull harder, I will get new vids in a week or so
Originally Posted by CaliboyTA
ur car sounds very nice with the magnaflows.
i have the same cam and almost the same mods that this guy has and i run a 12.71@115mph with a crappy driver.
i have the same cam and almost the same mods that this guy has and i run a 12.71@115mph with a crappy driver.