PREDATOR-Z

For a Procharged you need more exhaust split.
This would work well in certain Turbo app.

Zach@MTI

iTrader: (3)

We have installed many magnacharer/procharger systems on cars that already had the Stealth II camshaft installed and they have all made great power. If installing a cam at the same time or after a supercharger is installed we normally use our G1 camshaft 228/232 113 or 115LSA which is excellent in a supercharged applications.

BarneyMobile

iTrader: (4)

I placed an order in with MTI yesterday on my lunch break for the Stealth2 cam, I also bought springs and pushrods from them. I cant wait to get everything!

Zach@MTI

iTrader: (3)

Your buisness is much appreciated, I am sure you will be pleased with the camshaft!! I threw in some liscense plate frames with the order

BarneyMobile

iTrader: (4)

I've had the stealth2 cam in the car for about a month now along with the addition of LT headers catted y-pipe LM1, 3.90 gears and typhoon intake. I must say, the car pulls like a freight train! I absolutely love this cam. It drives just like stock with more power. With a catted y-pipe, you cant tell the car even has a cam. I caught a few people off gaurd thinking all I had was just a cat-back exhaust The car is getting dyno tuned soon so I'll have some numbers to put up. I still have a few other bolt-ons I want to add on. Soon I will also be adding a set of ported 5.3l heads.

Thanks again to the guys at MTI, you guys are awsome!

Street Lethal

Real testing comes next month, see you at the track....

hirdlej

iTrader: (31)

So when can we expect that you'll post up some sound clips for us? Both idling and revving? Also we want dyno numbers and graphs after it's tuned

BarneyMobile

iTrader: (4)

I just got back from the dyno. I made 381.27rwhp and 364.50rwtq I still have to get my graph scanned but for now I going out and enjoying it

wesam

this is my dyno Number with MTI stealth II heads and full boltons

[IMG][/IMG]

my setup is :

2004 GTO A4
Kooks 1 3/4 LTs with cats
MTI stealth 2 224-220 .581-.581 116
Patriot LS6 stage 2 heads 59cc
Comp Hydrolic lifters
SLP 7400 push rods
SLP Oil Pump and Timing Chain
Vig 2800 TC
FAST 90 intake manifold with
FAST 90 TB
160 thermostat
MSD wires
NGK tr55 plugs
Transgo shift kit
Flex-A-Lite transmission cooler
SureFlo OTRCAI
SLP underdrive pulley
SureFlo catback with X-pipe
Mobil 1 oil
difftechnics 3.73 ratio

Any comments

Blk_Ws6

iTrader: (4)

I have the cheatr cam with a custom tune ,asp pulley,mac y pipe with stock manifolds,700r4 tranny with vacuum modulator,ported ls6 heads,ls6 intake,gms maf sensor,blackwing airbox,and 342.gear ratio and I can beat a 2006 corvette by a car 1/2 didn't bring it to the track yet .

Blk_Ws6

iTrader: (4)

2000 ws6 a4

eamador11

yes,cheater was designed for stock manifolds.

Zach@MTI

iTrader: (3)

Thanks for posting up! Those are good numbers through cats and A4

Zach

fortmyerspolice

iTrader: (7)

I'm gonna try this cam out

BlackNiteWS6

iTrader: (2)

They both claimed 40 hp? The CheaTR cam has almost 10 degrees less duration than the Stealth II cam. Is this really the case?

onecamaro1

I was also wanting a stealth 2 cam, but i'm worried about the torque loss on both ends compared to my graph, here is one of my off days but tq is over 300 from under 2500 till the end and don't worry about the afr, its been fixed.....new #'s in sig. Curve is still the same though.
i still want a bigger stealth street cam 6500rpm max with no loss anywhere even if the gains aren't as high as they could be.

onecamaro1

Nvm, i see the torque numbers on the right.