Ms4 GUYs come in!
Thread Starter
11 Second Club
iTrader: (33)
Joined: Nov 2005
Posts: 845
Likes: 0
From: Who Dat Nation!!!!!!
Ms4 GUYs come in! hey was up people there is a lot of people saying the ms4 cam is big but not giving great #'s on track. i did a few searches and read a few things i would just like yall to list the way u set up you combo and a few results good or bad. whats heads gears a4 or m6 etc... stand up for your MS4!
havent been to the track with mine yet but it pulls hard and i couldnt been any more satisfied with it thus far. sorry i couldnt be of any more help. there are a lot of ppl running this cam though so im sure a few will chime in...
Thread Starter
11 Second Club
iTrader: (33)
Joined: Nov 2005
Posts: 845
Likes: 0
From: Who Dat Nation!!!!!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
11 Second Club
iTrader: (33)
Joined: Nov 2005
Posts: 845
Likes: 0
From: Who Dat Nation!!!!!!
Thread Starter
11 Second Club
iTrader: (33)
Joined: Nov 2005
Posts: 845
Likes: 0
From: Who Dat Nation!!!!!!
the things i was hearing was like the bottom end power was not good.there is to much lift on cam its over rated etc.. your normal hater stuff. i brought the cam anyway it was in my m6 z28 now i put that motor in my vert 2001 z28 i never had it tuned and broke rear in my 98. so i love it untuned so i will be very happy tuned. see around here in new orleans everyone wants a thunder cam or a futrel cam i just wanted diff. so thats where the hating began dont get me wrong i still use (thunder cams Pat G) and jeff at thunder does all my tunning. its just people round here are brain washed lol
So then it is definately worth buying the cam?
What type of max lift are your springs. Cuz i think, if I am not mistaken that the ms4 has like a .649 lift. Just curios to know what you put in it?
What type of max lift are your springs. Cuz i think, if I am not mistaken that the ms4 has like a .649 lift. Just curios to know what you put in it?
I still like the ms3 over the ms4...but my buddy in his h/c vette went 11.5 at 122 ish...
my ms3/5.3 heads camaro went 11.53 at 119 letting out (no cage) 7.42 1/8th mile...next time out on skinny's went 7.18 at 96.7 in the 1/8th.
my ms3/5.3 heads camaro went 11.53 at 119 letting out (no cage) 7.42 1/8th mile...next time out on skinny's went 7.18 at 96.7 in the 1/8th.
i know bigger is not always better, but i wanted to say that i have one of the biggest cam's you can put in a stock ls1... and if you ask me, 7.35 in the 1/8 with et streets and 275's up front and everything still hooked up... i think the cam shows its power.
no i do not DD my car, but with the current tune, car is a VERY good driver. so yes i would DD it, but this cam is hard on some parts.
no i do not DD my car, but with the current tune, car is a VERY good driver. so yes i would DD it, but this cam is hard on some parts.
Is your buddy in his vette, running the MS4 cam? and what size heads? Same question to you, what size heads are you running? I know 5.3, but which ones/stage?
I have some stage 1.5 5.3 TEA heads.
We are both fast 90/90 cars with about 11.5 to 1 CR.
Yes he had an MS4, took it ou for a diff Patrick G cam, lost a lil on the top end but gained all through out.
