cheapest way to cut piston's check it out!!!
12-20-2007, 09:41 PM
#84
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
are you boyd or something i do not get it.
or ARE YOU A LEGEND IN YOUR'E OWN MIND
12-20-2007, 09:45 PM
#86
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
that pic look's like it was took down south where those 4 car's are worth more than the whole town.
i get it now you are king in smallsville. sorry i did not know
i get it now you are king in smallsville. sorry i did not know
12-20-2007, 09:53 PM
#94
All I Tried To Do Was Explain Something To You. You Wanna Be A Dick, Thats Fine. I Have More Experience Building Cars Than You Ever Will In Your Lifetime. Choose Not To Listen, Thats Your Bad. Dont Try To Play Down Valuable Info. I've Been Doing This Too Long.
I've Built More Fast Cars This Year Than You Will In The Next 10 Years. Take It As You Will. Idiots Like You Never Listen.......
I've Built More Fast Cars This Year Than You Will In The Next 10 Years. Take It As You Will. Idiots Like You Never Listen.......
12-20-2007, 10:04 PM
#95
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
All I Tried To Do Was Explain Something To You. You Wanna Be A Dick, Thats Fine. I Have More Experience Building Cars Than You Ever Will In Your Lifetime. Choose Not To Listen, Thats Your Bad. Dont Try To Play Down Valuable Info. I've Been Doing This Too Long.
I've Built More Fast Cars This Year Than You Will In The Next 10 Years. Take It As You Will. Idiots Like You Never Listen.......
I've Built More Fast Cars This Year Than You Will In The Next 10 Years. Take It As You Will. Idiots Like You Never Listen.......
stop being mad i am just poken fun
but you asked for this. just as i did by trying to come up with a cheap way to cut piston's. and it worked fine. for some reason it make's you guy's feel better to be a *** than to just read and let go or to post to gain nothing as far as knoledge but to let the whole world know how cool you are but end up looking dumb as hell in the end
if one of youre customer's let you i will race you with my car that is paid for with my die maker wage
so bring it borrow it what ever get within 6 hr's of mi and i will run you and you may be me.
but when i tow my debt free car home that i owe 0 on i will have a smile on my face . and i will go back to work makeing my low diemaker wage
12-20-2007, 10:17 PM
#97
11 Second Club
Thread Starter
iTrader: (4)
Join Date: Mar 2007
Location: Grand haven ,MI
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
you did nothing you say. you puffed up and sprayed bull ****
they are not youre cars yeah it is onething to work on them but to own one is diff
I hope for you someday you own a sweet car.good luck
they are not youre cars yeah it is onething to work on them but to own one is diff
I hope for you someday you own a sweet car.good luck
12-20-2007, 10:25 PM
#98
Psycho Alert.
I didn't know I was supposed to sit here and wait for a response sorry.
That TSB talks not only about introducing abrasives into the engine but more important using abrasives to clean a gasket sealing surface.
Go back and read it (if one of your eye ***** didn't pop out yet) it says it rounds the flat surfaces off, which is no good for sealing obviously.
You can tape an engine up when fly cutting, it's quite common. Also common is to fly cut an engine thats only mocked up so it can be disassembled and cleaned. Your TSB is mainly refering to damaging the gasket surfaces with an abrasive tool.
Hope you make it to the pharmacy ok, you ******* stupid ****. Your pics mean **** to me, I might print out a few and wipe my *** with them.
I didn't know I was supposed to sit here and wait for a response sorry.
That TSB talks not only about introducing abrasives into the engine but more important using abrasives to clean a gasket sealing surface.
Go back and read it (if one of your eye ***** didn't pop out yet) it says it rounds the flat surfaces off, which is no good for sealing obviously.
You can tape an engine up when fly cutting, it's quite common. Also common is to fly cut an engine thats only mocked up so it can be disassembled and cleaned. Your TSB is mainly refering to damaging the gasket surfaces with an abrasive tool.
Hope you make it to the pharmacy ok, you ******* stupid ****. Your pics mean **** to me, I might print out a few and wipe my *** with them.
