Patriot or Livernois Stage II LS6
#1
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Patriot or Livernois Stage II LS6
Patriot or Livernois Stage II LS6
I have been looking at these two heads and need some help deciding what to go with. I have looked at the AFR 205 and am considering those as well I just would like to save a little by going with one of the others if they flow pretty close. Any opinions on which is better? Mods in sig below. I am looking for top end power (highway speeds) as I have n2o for down low.
Thanks,
Daniel
I have been looking at these two heads and need some help deciding what to go with. I have looked at the AFR 205 and am considering those as well I just would like to save a little by going with one of the others if they flow pretty close. Any opinions on which is better? Mods in sig below. I am looking for top end power (highway speeds) as I have n2o for down low.
Thanks,
Daniel
#3
LS1Tech Premium Sponsor
iTrader: (4)
Guys don't rule out the PRC stage 2 ls6 heads, I think you'll find if you search the recent dyno results that the PRC cylinder heads perform awesome! We currently have $75 off all PRC cylinder heads for the rest of the year...
Checkout the dyno section when you get some extra time, I think that will help to direct you in towards the best cylinder head for the money...
http://www.texas-speed.com/shop/item...d=134&catid=40
Checkout the dyno section when you get some extra time, I think that will help to direct you in towards the best cylinder head for the money...
http://www.texas-speed.com/shop/item...d=134&catid=40
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#4
I couldn't have been happier with my Livernois heads and the work the performed on my car!!!
Here's a thread with a few others running their heads
Click Here
-Rick
Here's a thread with a few others running their heads
Click Here
-Rick
Trending Topics
#9
TECH Regular
iTrader: (1)
Guys don't rule out the PRC stage 2 ls6 heads, I think you'll find if you search the recent dyno results that the PRC cylinder heads perform awesome! We currently have $75 off all PRC cylinder heads for the rest of the year...
Checkout the dyno section when you get some extra time, I think that will help to direct you in towards the best cylinder head for the money...
http://www.texas-speed.com/shop/item...d=134&catid=40
Checkout the dyno section when you get some extra time, I think that will help to direct you in towards the best cylinder head for the money...
http://www.texas-speed.com/shop/item...d=134&catid=40
Thanks
Warren
#12
LS1TECH Sponsor
Join Date: Nov 2006
Location: Downriver
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Patriot or Livernois Stage II LS6
I have been looking at these two heads and need some help deciding what to go with. I have looked at the AFR 205 and am considering those as well I just would like to save a little by going with one of the others if they flow pretty close. Any opinions on which is better? Mods in sig below. I am looking for top end power (highway speeds) as I have n2o for down low.
Thanks,
Daniel
I have been looking at these two heads and need some help deciding what to go with. I have looked at the AFR 205 and am considering those as well I just would like to save a little by going with one of the others if they flow pretty close. Any opinions on which is better? Mods in sig below. I am looking for top end power (highway speeds) as I have n2o for down low.
Thanks,
Daniel
What cam are you going to be running? A lot of people have had great results including myself. We put a LOT of R&D into the heads and especially into developing stages that work best for different applications. Our stage 2 heads now come standard with our Livernois Exclusive Valve springs good to .690 lift and Manley Titanium Retainers. They are on sale right now and really can't be beat for the "bang for the buck". If you need to buy head gaskets, ARP bolts/studs, and any other misc install materials we can work out a deal for you. Take a look around on here and you will see some of the results we have had.
Please send me a PM if you are interested and I can get you set up. I will try to reply as soon as possible.
Hope everyone has a good Holiday. Merry Christmas and have a safe new year!
Chad @ Livernois Motorsports
#13
TECH Regular
iTrader: (1)
Daniel,
What cam are you going to be running? A lot of people have had great results including myself. We put a LOT of R&D into the heads and especially into developing stages that work best for different applications. Our stage 2 heads now come standard with our Livernois Exclusive Valve springs good to .690 lift and Manley Titanium Retainers. They are on sale right now and really can't be beat for the "bang for the buck". If you need to buy head gaskets, ARP bolts/studs, and any other misc install materials we can work out a deal for you. Take a look around on here and you will see some of the results we have had.
Please send me a PM if you are interested and I can get you set up. I will try to reply as soon as possible.
Hope everyone has a good Holiday. Merry Christmas and have a safe new year!
Chad @ Livernois Motorsports
What cam are you going to be running? A lot of people have had great results including myself. We put a LOT of R&D into the heads and especially into developing stages that work best for different applications. Our stage 2 heads now come standard with our Livernois Exclusive Valve springs good to .690 lift and Manley Titanium Retainers. They are on sale right now and really can't be beat for the "bang for the buck". If you need to buy head gaskets, ARP bolts/studs, and any other misc install materials we can work out a deal for you. Take a look around on here and you will see some of the results we have had.
Please send me a PM if you are interested and I can get you set up. I will try to reply as soon as possible.
Hope everyone has a good Holiday. Merry Christmas and have a safe new year!
Chad @ Livernois Motorsports
I have a couple sets I would like to send to you to get done?
#14
We have several versions of our CNC ported 243 heads to offer. Our company has also put much time into R&D, especially on our Predator series heads. If you would, give us a call and we will be more than happy to go over all options including complete kits we can provide you. We think you will find we have more options to offer than many other head providers, with choices ranging from $1095.00 per pair assembled to $1795.00 per pair for the Predator heads. Don't forget we offer a complete line of accessories including Harland Sharp, Yella Terra, JP, ARP, GM Performance, etc.
#19
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Daniel,
What cam are you going to be running? A lot of people have had great results including myself. We put a LOT of R&D into the heads and especially into developing stages that work best for different applications. Our stage 2 heads now come standard with our Livernois Exclusive Valve springs good to .690 lift and Manley Titanium Retainers. They are on sale right now and really can't be beat for the "bang for the buck". If you need to buy head gaskets, ARP bolts/studs, and any other misc install materials we can work out a deal for you. Take a look around on here and you will see some of the results we have had.
Please send me a PM if you are interested and I can get you set up. I will try to reply as soon as possible.
Hope everyone has a good Holiday. Merry Christmas and have a safe new year!
Chad @ Livernois Motorsports
What cam are you going to be running? A lot of people have had great results including myself. We put a LOT of R&D into the heads and especially into developing stages that work best for different applications. Our stage 2 heads now come standard with our Livernois Exclusive Valve springs good to .690 lift and Manley Titanium Retainers. They are on sale right now and really can't be beat for the "bang for the buck". If you need to buy head gaskets, ARP bolts/studs, and any other misc install materials we can work out a deal for you. Take a look around on here and you will see some of the results we have had.
Please send me a PM if you are interested and I can get you set up. I will try to reply as soon as possible.
Hope everyone has a good Holiday. Merry Christmas and have a safe new year!
Chad @ Livernois Motorsports
#20
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
I talked with Chad @ Livernois and said I would neet to flycut if I used their heads. So I need to know if any of the other vendors have heads that cary stock height with improved flow numbers as my cam is in the car with stock heads now. Just want more power.
Thanks
Thanks