WILL I BE FINE WITH .30 OFF THE HEAD AND A THE C1 CAM?
ANY INFO WILL BE GREATFULL

 

anyone konw

 

its a c2 cam 224/224 581/581 112

 

I have a Comp Cam 224/228 .581/.581 114 +4 installed on heads that are milled for a C/R of 11:1 (.40 I think???) I am having no problems. I am running 7.350 pushrods. FYI, pushrod length does not affect lift. Who did the work on the heads? They will/should know.

 

My fren ported and poilished my heads for me. He sayed nothing bigger than a .591 lift will be fine just trying to get another thought.he flowed them and got 288-290 on the intake at .600 lift 229-230 on the exhaust side at .600.

 

That's my same setup. .581 224 cam and ls1 heads milled .30 All is good!

 

how much rwhp are you making?

 

Gosh I hope you guys aren't taking .30-.40 off your heads. They are scrap if you do! Maybe .030 or .040

 

My fren took .29 to give that a little margin to .30 of the heads.

 

.30 is 300 thousandths, that's almost a third of an inch! I think you mean 0.030 inch.

 

yeah that

 

Surprise AZ...huh....