correct me if i am wrong
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Wisconsin
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
correct me if i am wrong
as the title says, a little insight. I just read the ls6 pcv conversion on ls1 how to.com and looks good, one thing they install the old pcv valve in line from the valley cover to the intake. Not that it is wrong, but isnt the baffle in the valley cover resrticted to act like a valve?? i have a ls2 set up i am building with the ls2 cover and i was told all i need is the hose from the valley cover to the intake. Are the ls6 covers different, (of course the knock sensor holes) but other than that. I guess i just want to know so i know what to do with mine. Any info will be appriciated.
#2
TECH Fanatic
iTrader: (9)
Join Date: Nov 2005
Location: Mass
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
I don't think there is any type of one way valve in the baffle of the LS6 valley pan. I still have the PCV in line as well. I got the newer style PCV - no moving parts just a smaller hole out the back.
http://www.putfile.com/pic.php?img=7299774
http://www.putfile.com/pic.php?img=7299774
#3
11 Second Club
Thread Starter
iTrader: (14)
Join Date: May 2007
Location: Wisconsin
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
called the stealership, for a gto with the ls2 they dont show any pcv valve. just the hose from the valley cover to the intake. there must me something in that baffle.
#7
TECH Fanatic
iTrader: (13)
04' ls6 was the only year they did the pcv on the valley cover & carried the design over to the ls2/ls7... Use the ls2 cover it's a better design vs the old 00-02 ls6 cover.. You will not need a pcv as it's already built into the plastic baffle under your ls2 valley cover.