Need Help With Cam Install?
Thread Starter
On The Tree
Joined: Feb 2008
Posts: 130
Likes: 0
Need Help With Cam Install? Are all these the parts I need to install for a successful cam set-up. Also what other parts do I need besides and ls6 ported oil pump and ls2 timing chain? PLEASE I NEED HELP? GIVE ME SOME WISDOM
Does MPH motorsports have a good package $649.00?it comes with
Patriot Dual Extreme Springs
Super 7 Locks
Titanium Retainers
Machined Bases
Viton Rubber Intake/Exhaust Seals
Cam Swap Gasket Package
Water Pump Gaskets
Harmonic Balancer Bolt
Front Main Seal
Timing Cover Gasket
Comp Cams Custom Grind Camshaft
Supply your own spec, or we can help you choose one
Does MPH motorsports have a good package $649.00?it comes with
Patriot Dual Extreme Springs
Super 7 Locks
Titanium Retainers
Machined Bases
Viton Rubber Intake/Exhaust Seals
Cam Swap Gasket Package
Water Pump Gaskets
Harmonic Balancer Bolt
Front Main Seal
Timing Cover Gasket
Comp Cams Custom Grind Camshaft
Supply your own spec, or we can help you choose one
I've been doing a lot of research regarding cams and maybe heads.
The package you have listed seems competitive by the time you add the oil pump.
There are several vendors on LS1Tech that offer competitive prices also.
You will also need the Crane valve spring compressor tool as well.
.
The package you have listed seems competitive by the time you add the oil pump.
There are several vendors on LS1Tech that offer competitive prices also.
You will also need the Crane valve spring compressor tool as well.
.
I've been doing a lot of research regarding cams and maybe heads.
The package you have listed seems competitive by the time you add the oil pump.
There are several vendors on LS1Tech that offer competitive prices also.
You will also need the Crane valve spring compressor tool as well.
.
The package you have listed seems competitive by the time you add the oil pump.
There are several vendors on LS1Tech that offer competitive prices also.
You will also need the Crane valve spring compressor tool as well.
.
Thread Starter
On The Tree
Joined: Feb 2008
Posts: 130
Likes: 0
Im not doing the install but what I was meaning is if in the cam package has all the neccessary upgrades for my valvetrain. Do I need to buy anything else for my valvetrain? Except oil pump and timing chain
Trending Topics
the rods are to slide in the two holes when you have your timing cover offf to keep the lifters from falling down into your crankcase.
Get some pushrods
And a ported ls6 oil pump is a good idea
timing chain
Get some pushrods
And a ported ls6 oil pump is a good idea
timing chain
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
You can buy the tools from thunder racing to prevent that.
The stock pushrods are 5/16, upgrading with a thicker walled chromolly
is cheap insurance to prevent bending the stockers. Due to the increased
lift thus, higher spring pressure.
Basically the upgraded pushrod will have similar dimensions to
the stock ones.
.
.
is cheap insurance to prevent bending the stockers. Due to the increased
lift thus, higher spring pressure.
Basically the upgraded pushrod will have similar dimensions to
the stock ones.
.
.