After Cam Swap Problems...
#1
Teching In
Thread Starter
Join Date: Jun 2007
Location: North East PA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What should I expect? I just finished the swap today. Drove it home and it's putting out some smoke. Not a lot, but enough to notice. Smoke color was a blueish gray. The smoke would go away and then come back. Also, car hesitates, like its missing or something, at around 3k rpms in 4th gear. Didn't really notice it in any other gear.
#2
11 Second Club
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That smoke more than likely, is cause you are burning rich, you will probibly need to change your 02's as you get it tuned.
Your O2's could have been bad to begin with, but now that you have a cam, you will notice them being out. Thats what was wrong with mine, after I changed them and the spark plugs, it doesn't smoke anymore.
Your O2's could have been bad to begin with, but now that you have a cam, you will notice them being out. Thats what was wrong with mine, after I changed them and the spark plugs, it doesn't smoke anymore.
#3
Teching In
Thread Starter
Join Date: Jun 2007
Location: North East PA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the old rear 02's from when I took them out after I put my headers in. Would they be ok to use? And they are 5k miles on the spark plugs in there now.
#4
11 Second Club
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If I am not mistaken, you can't use your rears, cause they are a different type of 02
I bought some Denso's off line, they were here the next day. I ordered the corvette ones, so I would not have to splice the lines.. They worked great.
I bought some Denso's off line, they were here the next day. I ordered the corvette ones, so I would not have to splice the lines.. They worked great.
Trending Topics
#10
Teching In
Thread Starter
Join Date: Jun 2007
Location: North East PA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Threw a code today.
P0106....Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem
Is this bad? How can I make this go away? Tune maybe?
P0106....Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem
Is this bad? How can I make this go away? Tune maybe?
#13
TECH Fanatic
iTrader: (31)
Join Date: Apr 2007
Location: Dover DE
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That cam is way to big to run on a stock tune and not have problems with it running like crap. Get it tunned and then see how it runs. I also woun't drive it much until you do.
Re'
Re'
#15
On The Tree
iTrader: (2)
Join Date: Jul 2006
Location: Moorpark,Ca
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
With that cam you are most likely idling in the 55-60 kpa range. That will cause you to throw that code. Your tuner will have to extend that parameter. Also you will probably start getting multi miss fire codes as well, again that will need to be tuned out. Get that car tunned. Those codes won't cause any harm (if they are caused by the cam) but not tunning it could.
#18
Teching In
Thread Starter
Join Date: Jun 2007
Location: North East PA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts