MS3 Cam

Reply Subscribe

Thread Tools

Search this Thread

06-10-2008 | 04:52 PM

#21

sedanman

Launching!

iTrader: (10)

Joined: Dec 2006

Posts: 284

Likes: 0

From: Indy

I want to order some 5.3 stg 2.5 heads but my MS3 is on a 111lsa will they clear?

Reply Like

06-11-2008 | 07:10 AM

#22

NVR_ENUF

On The Tree

iTrader: (13)

Joined: Oct 2005

Posts: 126

Likes: 0

From: WI

Quote:

Originally Posted by fastvet

So your running the MS3 cam on 59cc heads?

I WAS, yes.....

Quote:

Mr. Brett
Thanks! We're heading up to West Bend dyno on saturday. Greg is bringing up his Magnacharged LS1 GTO as well. We should be on the dyno around 11-12 if you wanna swing by.

I have a football game around that time, so I probably wont be able to....

Quote:

c5_ls1_6spd
What kinnd of power did you make?
were your pistons flycut?
what LSA was that MS3 on?

436/392
No
113

Reply Like

06-11-2008 | 07:20 AM

#23

LS1C5Vette

TECH Resident

iTrader: (11)

Joined: Jan 2007

Posts: 836

Likes: 0

From: Oklahoma City

Quote:

Originally Posted by sedanman

I want to order some 5.3 stg 2.5 heads but my MS3 is on a 111lsa will they clear?

Yes IF you use a stock MLS gasket BUT ALWAYS check your clearance with clay at the very least, it will take 10 mins out of your time.

Reply Like

06-11-2008 | 09:06 AM

#24

fastvet

Thread Starter

11 Second Club

iTrader: (2)

Joined: Dec 2007

Posts: 588

Likes: 0

From: !!!!TEXAS!!!!

OK, so if you have a pair of LS6 heads and a pair of 5.3liter heads, both at 59cc, does the same principle apply? Another words, you wouldnt be able to run a better cam on one than the other. ?????

Reply Like