View Poll Results: Street sweeper vs. Torquer3 ??
Street Sweeper
72
88.89%
Torquer3
9
11.11%
Voters: 81. You may not vote on this poll
Street sweeper vs. Tsp-Torquer3
And to think I was considering dropping a bundle on a 402 to reach 500rwhp and all i realy need is a $400 cam
08-01-2008, 05:50 PM
#22
On The Tree
Thread Starter
Join Date: Jan 2007
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
and can chime in to give their opinions about the T3, street sweeper or mayb another cam that i could consider....
08-01-2008, 08:41 PM
#23
Street sweeper, is a REALLY good cam.
I'm not sure about people saying it needs the best parts to make good power. I dont think thats true at all. I've personal installed a few of all styles of the street sweeper. In everything frommild: stock heads, pacesetters, non FAST, stock TB/maf setup fbodies. All made over 400whp 380wtq. But a 98 auto that was like 380-390 whp.
The smaller 228/232 SS/HT in a c5 with ok mods (setup with alot of room to grow) 215 ETs, stock TB/maf, with cats, z06 catback made 456whp, but a killer 421 wtq.
Super buget was hand ported 241s stock valves, and valve job. SS cam, fast78, stock maf,slp lid, ARH. Thu a SLP 2otL and a S60 put down 455whp 410whp
Its not a small cam, and DD with it is all up to what you think. What are you looking for?
I'm not sure about people saying it needs the best parts to make good power. I dont think thats true at all. I've personal installed a few of all styles of the street sweeper. In everything frommild: stock heads, pacesetters, non FAST, stock TB/maf setup fbodies. All made over 400whp 380wtq. But a 98 auto that was like 380-390 whp.
The smaller 228/232 SS/HT in a c5 with ok mods (setup with alot of room to grow) 215 ETs, stock TB/maf, with cats, z06 catback made 456whp, but a killer 421 wtq.
Super buget was hand ported 241s stock valves, and valve job. SS cam, fast78, stock maf,slp lid, ARH. Thu a SLP 2otL and a S60 put down 455whp 410whp
Its not a small cam, and DD with it is all up to what you think. What are you looking for?
08-01-2008, 09:17 PM
#24
Restricted User
iTrader: (10)
Join Date: Feb 2007
Location: Jersey
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
Personally I'm going with a T3 cam and PRC LS6 stg 2.5 heads on my daily....I haven't done all that much research, but from what I have seen it's not a bad setup.
08-02-2008, 08:10 AM
#25
Street sweeper, is a REALLY good cam.
I'm not sure about people saying it needs the best parts to make good power. I dont think thats true at all. I've personal installed a few of all styles of the street sweeper. In everything frommild: stock heads, pacesetters, non FAST, stock TB/maf setup fbodies. All made over 400whp 380wtq. But a 98 auto that was like 380-390 whp.
The smaller 228/232 SS/HT in a c5 with ok mods (setup with alot of room to grow) 215 ETs, stock TB/maf, with cats, z06 catback made 456whp, but a killer 421 wtq.
Super buget was hand ported 241s stock valves, and valve job. SS cam, fast78, stock maf,slp lid, ARH. Thu a SLP 2otL and a S60 put down 455whp 410whp
Its not a small cam, and DD with it is all up to what you think. What are you looking for?
I'm not sure about people saying it needs the best parts to make good power. I dont think thats true at all. I've personal installed a few of all styles of the street sweeper. In everything frommild: stock heads, pacesetters, non FAST, stock TB/maf setup fbodies. All made over 400whp 380wtq. But a 98 auto that was like 380-390 whp.
The smaller 228/232 SS/HT in a c5 with ok mods (setup with alot of room to grow) 215 ETs, stock TB/maf, with cats, z06 catback made 456whp, but a killer 421 wtq.
Super buget was hand ported 241s stock valves, and valve job. SS cam, fast78, stock maf,slp lid, ARH. Thu a SLP 2otL and a S60 put down 455whp 410whp
Its not a small cam, and DD with it is all up to what you think. What are you looking for?
08-10-2008, 01:38 PM
#27
11 Second Club
iTrader: (14)
Join Date: Nov 2004
Location: Michigan (Macomb or Lansing)
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
One thing you need to watch with the torquer v3 is springs. Mine toasted 3 prc duals so far, might want to go a lil beefier on springs. It has a lot of lift. I love the cam, but it is a bit aggressive on lift.
08-10-2008, 07:35 PM
#28
TECH Addict
iTrader: (5)
Join Date: Jan 2004
Location: Miami, Fl. - Hurricane Highway
Posts: 2,458
Likes: 0
Received 0 Likes
on
0 Posts
I have never heard of the street sweeper before, but i know the Torquer series cams are proven performers. Don't go by what everyone tells you sounds good, because the specs are higher. Go with the true performer, whether it be the torquer or the street sweeper. Last thing you want is to go through hell installing the cam only to be disappointed.
-Joel
-Joel
08-10-2008, 11:00 PM
#29
TECH Apprentice
Join Date: Aug 2007
Location: Mississippi
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
08-11-2008, 09:05 AM
#30
On The Tree
Join Date: Dec 2007
Location: Kansas/North Dakota
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Definately go with the streetsweeper. I have heard good things about it. The reason I am telling you to stay away from the T3 is that my friend has a 98 camaro with the torquer 3 in it, and first off, it has NO power down low. Oh, and its a stalled auto. All his power is 5k+. Oh, and it does not match the name of "torquer." His car only put down 343 rwtq at 5k rpms. My bone stock gto can beat him in the 1/8th just because he has NO power under the curve.
08-11-2008, 11:21 AM
#31
Definately go with the streetsweeper. I have heard good things about it. The reason I am telling you to stay away from the T3 is that my friend has a 98 camaro with the torquer 3 in it, and first off, it has NO power down low. Oh, and its a stalled auto. All his power is 5k+. Oh, and it does not match the name of "torquer." His car only put down 343 rwtq at 5k rpms. My bone stock gto can beat him in the 1/8th just because he has NO power under the curve.
08-11-2008, 02:43 PM
#32
TECH Apprentice
Join Date: Aug 2007
Location: Mississippi
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Definately go with the streetsweeper. I have heard good things about it. The reason I am telling you to stay away from the T3 is that my friend has a 98 camaro with the torquer 3 in it, and first off, it has NO power down low. Oh, and its a stalled auto. All his power is 5k+. Oh, and it does not match the name of "torquer." His car only put down 343 rwtq at 5k rpms. My bone stock gto can beat him in the 1/8th just because he has NO power under the curve.
