New cam installed
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Over the weekend I installed my new cam spec'd by pat g. It's a 226/232 .609/.604 113+4
Driveability is great, almost stock. Huge improvement from my ASA. Alot more responsive down low, without the surging issues of the asa.
Overall I am happy with it. I do however miss the chop of the asa at idle, but the driveability makes up for it.
Next tuesday it's going on the dyno. See how she runs and see what the a/f ratio looks, depending on that maybe a re-tune (my current tune is garbage, if you're looking for a tune in the detroit metro area, I can tell you one place I would not recommend)
All and all, here's to a good upgrade!
Driveability is great, almost stock. Huge improvement from my ASA. Alot more responsive down low, without the surging issues of the asa.
Overall I am happy with it. I do however miss the chop of the asa at idle, but the driveability makes up for it.
Next tuesday it's going on the dyno. See how she runs and see what the a/f ratio looks, depending on that maybe a re-tune (my current tune is garbage, if you're looking for a tune in the detroit metro area, I can tell you one place I would not recommend)
All and all, here's to a good upgrade!
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#3
TECH Junkie
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well....what did you expect?
no numbers, no times, just some simple impressions of a new cam.
i just had my Mez EWP delivered...i even installed the 160 stat in it...
but its still in the box. no numbers or impressions other than it looks sexy.
should i start a thread and expect tons of replys? NO.
anxious to see the numbers with the cam.
what did it do on the old cam..what were the old cam specs??
no numbers, no times, just some simple impressions of a new cam.
i just had my Mez EWP delivered...i even installed the 160 stat in it...
but its still in the box. no numbers or impressions other than it looks sexy.
should i start a thread and expect tons of replys? NO.
anxious to see the numbers with the cam.
what did it do on the old cam..what were the old cam specs??
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well....what did you expect?
no numbers, no times, just some simple impressions of a new cam.
i just had my Mez EWP delivered...i even installed the 160 stat in it...
but its still in the box. no numbers or impressions other than it looks sexy.
should i start a thread and expect tons of replys? NO.
anxious to see the numbers with the cam.
what did it do on the old cam..what were the old cam specs??
no numbers, no times, just some simple impressions of a new cam.
i just had my Mez EWP delivered...i even installed the 160 stat in it...
but its still in the box. no numbers or impressions other than it looks sexy.
should i start a thread and expect tons of replys? NO.
anxious to see the numbers with the cam.
what did it do on the old cam..what were the old cam specs??
![Rotflmao](https://ls1tech.com/forums/images/smilies2/rotflmao.gif)
The ASA has similar specs on paper. It's a 226/232 .525/.525 110lsa. It just never did it for me other than it sounded real mean (alot meaner than it was infact).
It only made 358 rwhp with lt, cats, gmmg, and tune. Like I said, my tune was less than impressive. Full exhaust, y-pipe, and cats kill the numbers on that cam apparently. Very suspetable to power loss from a "not super high flow exhaust"
I am anxious to see the numbers as well. I'm not sure how good they'll be, as I've been having clutch fluid issues for the past month or so. Sometimes it grabs, sometimes it doesn't. I'm going to try to flush it before taking it on tuesday. I don't pay for the dyno runs, so it's not really a big deal if it doesn't make good numbers due to the clutch. It's probably getting replaced in a couple months.
Trending Topics
#9
Launching!
iTrader: (1)
Join Date: Mar 2008
Location: PASADENA,TX.
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I forgot that if you want alot of replys on this site, you need to come up with a topic more like "Which 224 cam should I get?" or "How much power will my 224 cam make?"
The ASA has similar specs on paper. It's a 226/232 .525/.525 110lsa. It just never did it for me other than it sounded real mean (alot meaner than it was infact).
It only made 358 rwhp with lt, cats, gmmg, and tune. Like I said, my tune was less than impressive. Full exhaust, y-pipe, and cats kill the numbers on that cam apparently. Very suspetable to power loss from a "not super high flow exhaust"
I am anxious to see the numbers as well. I'm not sure how good they'll be, as I've been having clutch fluid issues for the past month or so. Sometimes it grabs, sometimes it doesn't. I'm going to try to flush it before taking it on tuesday. I don't pay for the dyno runs, so it's not really a big deal if it doesn't make good numbers due to the clutch. It's probably getting replaced in a couple months.
![Rotflmao](https://ls1tech.com/forums/images/smilies2/rotflmao.gif)
The ASA has similar specs on paper. It's a 226/232 .525/.525 110lsa. It just never did it for me other than it sounded real mean (alot meaner than it was infact).
It only made 358 rwhp with lt, cats, gmmg, and tune. Like I said, my tune was less than impressive. Full exhaust, y-pipe, and cats kill the numbers on that cam apparently. Very suspetable to power loss from a "not super high flow exhaust"
I am anxious to see the numbers as well. I'm not sure how good they'll be, as I've been having clutch fluid issues for the past month or so. Sometimes it grabs, sometimes it doesn't. I'm going to try to flush it before taking it on tuesday. I don't pay for the dyno runs, so it's not really a big deal if it doesn't make good numbers due to the clutch. It's probably getting replaced in a couple months.
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
For the record, I wasn't really bitter about no responses... It was just my way of "ttt"
#15
TECH Fanatic
iTrader: (4)
Join Date: Jul 2003
Location: Orange Park/ Jacksonville, FL
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The ASA has similar specs on paper. It's a 226/232 .525/.525 110lsa. It just never did it for me other than it sounded real mean (alot meaner than it was infact).
It only made 358 rwhp with lt, cats, gmmg, and tune. Like I said, my tune was less than impressive. Full exhaust, y-pipe, and cats kill the numbers on that cam apparently. Very suspetable to power loss from a "not super high flow exhaust"
Yeah, you're right, that ASA cam definately needs a really high flowing exhaust to perform. I'm running stepped headers and 3" td's w/o cats.
Sounds like you got a pretty good setup that you're happy with. Congrats on the new power!
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
Last edited by JBIRD02; 10-08-2008 at 10:31 PM.
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, It gained 10-25 ft-lbs from 1500-3000. There maybe more after the retune as well..
Jbird - yeah you're correct the asa is 226/236.. And yeah, I've seen your numbers on the asa and they do look great with the free flowing exhaust.
I'm thinking of going with a ported throttle body before I get it retuned, and have hopes of over 400 then... Not that it really matters, more so bragging rights because I am already happy with how it runs
Jbird - yeah you're correct the asa is 226/236.. And yeah, I've seen your numbers on the asa and they do look great with the free flowing exhaust.
I'm thinking of going with a ported throttle body before I get it retuned, and have hopes of over 400 then... Not that it really matters, more so bragging rights because I am already happy with how it runs
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#18
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you want the new cam to chop hard, try lowering your idle speed. By lowering it 100 rpm over where it is now, it will chop pretty hard while still giving you superb street manners. It's a simple tuners trick!
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#20
TECH Fanatic
iTrader: (4)
Join Date: Jul 2003
Location: Orange Park/ Jacksonville, FL
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, It gained 10-25 ft-lbs from 1500-3000. There maybe more after the retune as well..
Jbird - yeah you're correct the asa is 226/236.. And yeah, I've seen your numbers on the asa and they do look great with the free flowing exhaust.
I'm thinking of going with a ported throttle body before I get it retuned, and have hopes of over 400 then... Not that it really matters, more so bragging rights because I am already happy with how it runs![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Jbird - yeah you're correct the asa is 226/236.. And yeah, I've seen your numbers on the asa and they do look great with the free flowing exhaust.
I'm thinking of going with a ported throttle body before I get it retuned, and have hopes of over 400 then... Not that it really matters, more so bragging rights because I am already happy with how it runs
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
You'd be surprised what a ported tb can do, especially if its not opening up all the way (90*) as it should. I had Bo White do mine awhile back and it was a major improvement!
Yeah, he's right. Have your tuner set your idle wherever you want it. When I got my car tuned recently @ EFI Alchemy, we played around with different idle speeds. Had it as low as 650 and it idled fine, but I didn't like it so I had him set it to 800.