ATI Damper without AC
#1
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Swanley, England
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
ATI Damper without AC
If i buy the ATI Damper without the A/C does the damper still sit in the same position for belt alignment? Or will it sit further back due to the A/C pulley not being there? Is it worth getting the one without the A/C pulley or shall i just get the non A/C as planned?
Also, where is the part number on the stock balancer? I have an LS3 with what i think is F-Body accessories but want to be certain before spending the money.
Also, where is the part number on the stock balancer? I have an LS3 with what i think is F-Body accessories but want to be certain before spending the money.
Last edited by AlexLSx7; 11-22-2017 at 02:00 PM.
#2
If you are running F-Body accessories then you will need the F-Body balancer. We have them for sale on our site with free shipping right now if you need the underdrive unit:
https://vengeanceracing.net/1998-200...hell-1907.html
Belt alignment stays the same (again, as long as you have the F-Body accessories). Part # is 917243.
- David @ Vengeance
https://vengeanceracing.net/1998-200...hell-1907.html
Belt alignment stays the same (again, as long as you have the F-Body accessories). Part # is 917243.
- David @ Vengeance
#3
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Swanley, England
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
If you are running F-Body accessories then you will need the F-Body balancer. We have them for sale on our site with free shipping right now if you need the underdrive unit:
https://vengeanceracing.net/1998-200...hell-1907.html
Belt alignment stays the same (again, as long as you have the F-Body accessories). Part # is 917243.
- David @ Vengeance
https://vengeanceracing.net/1998-200...hell-1907.html
Belt alignment stays the same (again, as long as you have the F-Body accessories). Part # is 917243.
- David @ Vengeance
Plus I don't really need an underdrive one as its twin turbo and going to be running over 800+. Would rather the full damping ability.
#4
The one without the A/C will be cheaper, and of course lighter. It will still have the dampening capability as the unit with the a/c pulley.
The only benefit is if you want to have air conditioning.
The only benefit is if you want to have air conditioning.
#6
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Swanley, England
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
as for PN, ATI has a huge table on their site for what you'll need.
http://www.atiracing.com/products/da...ts/damserp.htm
http://www.atiracing.com/products/da...ts/damserp.htm
I mean the part number for my current GM balancer, where on the actual balancer is it?
#7
TECH Enthusiast
You might as well get the one with the AC pulley gives you or the next owner of the car the option to put ac on it and those things are tough to get off. It is not going to cost you any HP having the extra pulley as long as it is not hooked up.
Trending Topics
#8
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Swanley, England
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Cool, i've got no problem with doing that, just wondered if there is any benefit to the non AC one.
#9
TECH Senior Member