LS3/l92 valves titanium available?
#21
TECH Addict
iTrader: (11)
LS7 Intake Valve -77.0 g
LS7 Exhaust Valve- 71.7 g
Retainer- 11.1g
keepers pair- 2.6 g
Stock L92 intake-108.6 grams -- Some non magnetic alloy
Manley 11620 -119 grams- Intake- The Manleys are solid SS
Manley 11621-92 grams- Exh
LS3 intake -89 grams – hollow stem alloy
LS3 exh same part# as L92 Exh- alloy
LS7 Exhaust Valve- 71.7 g
Retainer- 11.1g
keepers pair- 2.6 g
Stock L92 intake-108.6 grams -- Some non magnetic alloy
Manley 11620 -119 grams- Intake- The Manleys are solid SS
Manley 11621-92 grams- Exh
LS3 intake -89 grams – hollow stem alloy
LS3 exh same part# as L92 Exh- alloy
Do you have valve spring weights for any/all of the LS series valve springs?
#23
most of you guys just need to stay with a decent ss valve like ferrea..im not real fond of manley (on valves) but thats just my opinion...like stated before titanium will work on any power adder application...having a Beryllium copper valve seat helps quite a bit to.
So robin more info On these GMPP large port lsx heads..will they be released anytime soon..i seen pics on another site
So robin more info On these GMPP large port lsx heads..will they be released anytime soon..i seen pics on another site
#24
OWN3D BY MY PROF!
iTrader: (176)
I wasn't aware of the LS9 valves being available. They are still rather spendy at $80 each. Here's a really good post that someone posted a while ago.
I'm already in the process of doing this for my Formula. I have a set of Manley 7mm intake valves that I'm having shortened and turned down. I'll be using a standard 8mm stainless steel or inconel (If I can afford it) 1.60 exhaust valve.
I bought new "NASCAR" Del West SB2.2 Titanium valves off eBay 2.180" 5/16 stem intake and 1.60" 11/32 stem for less than a set of REV stainless exhaust valves. David Jarvis of Jarvis Performance is going to cut them down to length, re-groove the ends for locks and cut the intake diameter down from 2.180" to 2.169". He does great work and is very reasonable on cost. You need to come up with the 2.180" intake valves yourself because He doesn’t carry that size, but they are easy to find all over eBay.
www.Jarvisperformance.com
He advertises on eBay, Here...
http://cgi.ebay.com/ebaymotors/ws/eB...DME:L:RTQ:US:1
I'm going to bronze bush the guides to fit the new stem sizes and go with a set of Patriot Extreme’s for springs.
Frank
www.Jarvisperformance.com
He advertises on eBay, Here...
http://cgi.ebay.com/ebaymotors/ws/eB...DME:L:RTQ:US:1
I'm going to bronze bush the guides to fit the new stem sizes and go with a set of Patriot Extreme’s for springs.
Frank
#26
are the LS9 valves supposed to have a different valve lock than the standard ones for ls1-ls3? I hear theres a "rocker arm wear pad" ontop of the stem
edit, I found out they are 2.19" valves versus 2.16 parts catalog shows the same locks as standard ls1
edit, I found out they are 2.19" valves versus 2.16 parts catalog shows the same locks as standard ls1
Last edited by CamaroRick; 12-24-2008 at 07:52 AM.