Ls2/l92 help!
Ls2/l92 help! I'm doing a L92 swap on a LS2. I have heard that bigger cams require cutting reliefs in the pistons to clear the valves. My cam is a 240/244 605/596 113+2 LSA. If i use a OEM thickness on the head gasket and don't mill the heads will the valves clear? Also, if they will clear, how much thinner can I go on head gaskets or how much can I mill the heads because I would really like a little compression bump.
its when you put clay on the piston and bolt the heads down and valvetrain and turn the motor over it will mash the clay down, if it stops you know it wont work if it turns all the way over tear it down and look at how thin the clay is, i believe thats what he meant by it, but im pretty sure someone could tell you without having to do all that work
Trending Topics
well.. are you just doing the heads or are you dropping an l92 shortblock in the car too, because those pistons are flycut from gm.. if so you may be ok, but it sounds to me like your just putting the heads on your ls2, are you against having your pistons cut?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo The reason your Cam will be a dog is because it has way too much Duration for a 6.0l..the one I'm running in my 402 is a 243/247, .621/.612, 114+3.
I think you would see better results with a low to mid 230's duration Cam, with slightly smaller lift..
I think you would see better results with a low to mid 230's duration Cam, with slightly smaller lift..
