Haans249

iTrader: (24)

I've got 315's in the rear with NO hammering. All that was needed was a little grinding on my bump stops and that was it. Took about 20 mins to get done and the 11" rims with the 315's mounted. I have NO rubbing issues to speak of.

PUNISHER TA

iTrader: (13)

yea... i wanna run 345 invos lowered 2"...on the street and 315 slicks at the track. I know its not necessary, but im not gonna see my shortblock for like two months. so ive got plenty of time to waste.(Ill be done with school in a few weeks.

Haans249

iTrader: (24)

schweet, when I get my car all finished up, i'll have to make a trip up to check out your ride!

PUNISHER TA

iTrader: (13)

yea that sounds like a good plan. Should be fun. I have to worn you apparently there is another Black LS7 Trans Am driving around the fenton area... DAMN!!! so there would be three of us.. thats crazy. Makes it seem like these things are all over. lol

Gen414

iTrader: (38)

That gives you a good reason to take your time on teh mini tub then. If you do that, you should be OK. Just need a MIG, sawzall or a body saw, 4" grinder with an assortment of wheels, and your "time" and you can get it done.

PUNISHER TA

iTrader: (13)

Yea. I just happen to have all that.

I just dont know where ill be working. I should be closing on a house down here in florida some time next week. so excited.

1FASTBIRD

iTrader: (21)

Build is looking good bro Can't wait to see it done and finished

PUNISHER TA

iTrader: (13)

Thanks. im done with school on the 28th. I just can't wait to get back to work on it. I may not get to tub it. Time is a concern now.

I'm buying a house, so i have to move ALL MY **** from my parents house in MI to my house in Fl. So Ive gotta trailer my car down and build it in florida.

Should be fun.

1FASTBIRD

iTrader: (21)

Yes it should LOL... Man I can't wait till my 438 build is done too

PUNISHER TA

iTrader: (13)

wat top end are you using?

Haans249

iTrader: (24)

How are you moving? I have to move down to Fort Worth for a new job from Ann Arbor in about a month.

1FASTBIRD

iTrader: (21)

LS7 top end

PUNISHER TA

iTrader: (13)

I dont get it? HOW am i moving? It'll probably move in a little over a month.



I'm trying to decide what heads to go with...

1FASTBIRD

iTrader: (21)

I have heard nothing but good thing's about going with the LS7 top end... My sponsor is porting out my intake and West Coast Cylinder Head's is helping my sponsor do the porting on my head's... At least for the $3100 my head's will be badass

Haans249

iTrader: (24)

Lol, how are you moving your ****? Uhaul or moving service?

ms4z28

i looked at your first post and you planned on ls7 heads and using a fast 92? they have a different intake port unless you wait on the new fast ls7 intake but if not you have to you the ls7 intake

99blancoSS

iTrader: (115)

Richard does really nice work

PUNISHER TA

iTrader: (13)

Thats my Throttle Body....

PUNISHER TA

iTrader: (13)

I'm trying to decide what heads to go with...


Sorry, Umm yea U-hual

Im gonna drive my Dune Buggy into the truck, and pack all my **** around it.

then im gunna get a flat bed trailer for the T/A

PUNISHER TA

iTrader: (13)

This all reminds me. I forgot to post up pics of my LS7 intake and 2" Kooks