What is an LQ4 or LQ9?
#23
Launching!
iTrader: (1)
Join Date: Mar 2008
Location: All Over
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Don't buy an early LQ4--you don't want the iron heads or the long crank flange. They are the same thing after that. LQ4 has a dished piston and LQ9 has a flat top. The floating wrist pin wasn't introduced until 2005 and it came along with the polymer skirted pistons to reduce the cold piston slap that is such an annoyance. The rods are no stronger--they are still powdered metal, just full floater. Almost any LS part that will work on an LS1 will work on them. They are NOT akin to the LS2 except that they displace the same thing, and that is about where it ends. You are talking two completely different generations of powerplants. Either one makes a suitable place to start from though.