Loud Ticking noise from TSP LS2 402
#21
Launching!
Thread Starter
iTrader: (34)
Join Date: Jan 2004
Location: Algonquin, IL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok, I am gonna go get a pushrod length checker, but I found something interesting, I can turn the pushrods on the valves that are closed, is that normal, or is that a indicator of to small of pushrod lengths?
#23
FormerVendor
iTrader: (2)
Join Date: Dec 2001
Location: Baton Rouge, LA, USA
Posts: 1,954
Likes: 0
Received 3 Likes
on
3 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You don't need a length checker. It sounds like you are right a zero lash and your pushrods are .025"-.050" too short. Since you have a known length pushrod you can use the method above to get the correct length.
Hope this helps.
Shane
#25
Launching!
Thread Starter
iTrader: (34)
Join Date: Jan 2004
Location: Algonquin, IL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Definitely too short. I have a method posted here: See post #3... https://ls1tech.com/forums/generatio...s-too-big.html
You don't need a length checker. It sounds like you are right a zero lash and your pushrods are .025"-.050" too short. Since you have a known length pushrod you can use the method above to get the correct length.
Hope this helps.
Shane
You don't need a length checker. It sounds like you are right a zero lash and your pushrods are .025"-.050" too short. Since you have a known length pushrod you can use the method above to get the correct length.
Hope this helps.
Shane
#26
Launching!
Thread Starter
iTrader: (34)
Join Date: Jan 2004
Location: Algonquin, IL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I removed the 7.4s and installed one with one rocker arm, and at first I could not turn it with my fingers then once I torqued it two 22 ft lbs and checked it again, I could turn it. is it normal for the lifter to decompress like that? and would that still indicate not enough preload, trying to get ahold of a 8" caliper so i can measure the checker and add preload, but from what i am seeing it looks like I will need a 7.425 or 7.450
#27
TECH Addict
iTrader: (24)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
7.450 would be on the money. Try that and see if the noise goes away.
Also, are you saying that once the motor is warm you're seeing between 10-20psi oil pressure?
If so, that seems awful low. Did you put in the higher pressure spring in your oilpump? I like to see around 30-40 psi warm at idle. What weight oil are you running?
Also, are you saying that once the motor is warm you're seeing between 10-20psi oil pressure?
If so, that seems awful low. Did you put in the higher pressure spring in your oilpump? I like to see around 30-40 psi warm at idle. What weight oil are you running?