malott's formula

ok i have a 2000 ss camaro a4, i have a new set of heads (PRC stage 2.5 5.3) with 59cc chambers and the ls1/6 hot cam 525/525 lift 219/228 dur 112lsa. i wana break in 11s wata think? i already have 3800 stall 373 gears and headers and cut out, any body do this set up? if so wat kinda numbers think ill put down on dyno and 1/4 thank you all for ur time

baalic

iTrader: (8)

LOL I hardly think a 2000 SS Camaro says "sleeper" but....just throw N20 on it and call it good!! LOL

malott's formula

i just want people to think its stock

irnwkrkev

Not a very stealthy cam.

baalic

iTrader: (8)

Then run a catted Y with 2 mufflers..... LOL that should keep it semi quiet....lol or keep the exhaust factory...

malott's formula

i have the factory slp muffler that came on it

baalic

iTrader: (8)

ya but its still an upgrade over "stock"..... lol

Cliff

iTrader: (19)

I don't think 11's will occur with your current set up, sorry.

MadIceV8

iTrader: (12)

If he also has drag radials and a decent suspension he should be able to break into the high 11s. I've seen it done without a heads/cam package and minor weight reduction on Octane's previous Z28.

malott's formula

cliff i think iv seen ur car out at tulsa race way park was that u or a car that looks alike

Cliff

iTrader: (19)

I was there 1 x last year. I was trying to work out a few bugs.

malott's formula

thats a fukn nice car man were u ther wen xp was?

chase3

iTrader: (1)

I have to agree. yes head/cam cars go to the 11's but thats a small cam. What did it put to the wheels?

malott's formula

im bota put it all on

PRE-Z06

Not exactly a stealthy cam...I run those heads with my custom 218/230 .605/.604 116 cam and have been 7.0@100

66deuce

iTrader: (1)

high 11s are very doable if you can hook up..don't listen to the "net" experts on here that say otherwise,they have no clue what their talking about..

66deuce

iTrader: (1)

FWIW,i had a 98Z with all the bolt ons, Patriot heads,TR220 114lsa cam,3000 stall and 3.73 gears running mid 12's with a 2.0 60fts..(BFG drag radials)and bouncing off the rev limiter on the 2-3 shift because of the "professional" tune i had at the time..

baalic

iTrader: (8)

I saw a 98 Camaro on Pass time the other night, guy only had 436 rwhp according to his statement, and ran an 11.7...... it was a h/c/i LSI. Looked like a fast 90 when they had the hood opened.... I think this guy could get into 11's.

chase3

iTrader: (1)

with that cam he will be lucky to hit 400rwhp which is very unlikely. On my 347 it was frged with AFR heads milled and 232/234 on 112 and put down 447rwhp. His cam is coniderably smaller and heads wont flow what AFR's do. I am by no means bashing his setup i just dont see it running 11's.

99LS6SS

iTrader: (4)

Even with stock exhaust and no cats, it's still going to be loud